Robin Hoods Playground

Hey,just wondering if a lite-on can be spoofed with a benq drive and can I get the lite-on dump and key without a ck3.Sorry haven't been able to locate that tut.Thanks

The spoofing can be done. I think there is a tut for that on here viewtopic.php?f=197&t=233
If you get a good key out of your original drive you can put it in any drive with the correct build firmware.

For th CK3 there is a way you can solder and make your own spear or probe, for the power you can always use the 360's power. If you are using the 360's power there is a small chance in the future or even now MS will be able to see if the console has been powered without a drive connected. So be carefull with that.

CK3 is a great tool and works an any drive so it may be costing you once but it will help you allot !

Would I be able to get the key without a ck3,with iprep,etc.then spoof?

mallardman wrote:ould I be able to get the key without a ck3,with iprep,etc.then spoof?

no
you are going to need a ck3 pro or lite
or a different kind even a home made one (its a big pain)

the dvd drive has to be hook up to the pc with a comm rs232 cable or a usb
that is what the ck3 is for.

K,thanks guys!