Robin Hoods Playground

Hi PPLE

Looks like I just made a massive paper weight out of a console.......

I wanted to flash a samsung drive that currently had ver 1.5 to 1.51, I thought I would be clever and click Dummy from iXtreme
to get the key (Not thinking maybe this is only for LiteOn Drives) It gave me a key, I did this several times and got the same serial. I then proceded to create the hacked firmware and without reading the current firmware, clicked write

The drive does not work work now (Sucking)

I wonder why it gave me a key when i clicked there ????

Any1 have any suggestions?

Ok for BenQ, Samsung only use the MTKFlash Tab, and do you have a copy of your original firmware or key? If you do then you can just flash that in. If you don't, then you are out of luck my friend.

Yip thought as much .... willl have to use the console for spares ...

still dont get why it actually gave me a serial that looked good......?

If you really wanted to there is a tool called the Infectus extractor. It's kind of a pain to use but it might be worth it for you. It'll will actually read the DVD key from the 360's bios. modchip.ca sells them and there's a few tutorials on xbox scene.

Thanks for the reply

have u used this before?

I looked on the site and cannot find that product? I only see the INFECTUS 2 modchip and the INFECTUS X360 CPU TIME ATTACK ADD ON

no extractor

technoe wrote:If you really wanted to there is a tool called the Infectus extractor. It's kind of a pain to use but it might be worth it for you. It'll will actually read the DVD key from the 360's bios. modchip.ca sells them and there's a few tutorials on xbox scene.

I have actually heard that you can no longer pull the key from the board even using an Infectus.

Not to worry All sorted , managed to find the original firmware grabed the key and flashed the new firmware 100% now

HAPPY DAYS

Good Work