Robin Hoods Playground

I am trying to flash a ms28 but everytime I turn the 360 on it freezes my pc. It does it in windows as well as Dos. anyone know of a way to fix this? thanks

Ps I am using a via chipset its a roswill card and have yet to have an issue flashing anything with it.

im not to sure what is causing your prob but if it helps any i did my ms28 using iprep and im using a VIA 6421 SATA Card there is a good video tut. here on how to flash a samsung drive with iprep

Ya, I saw the video Tut and I know how to flash them I just cant figure out why my pc is locking up.. thx

well man
if you are using iprep and its locking up your pc when you power it up after booting in dos
about the only thing it can be is the dvd drive

go into detail about what you are doing and when you are doing what.

im going to try a diffrent card today see if that fixes it. there really isnt much to it.
when i turn the 360 on be it in dos or windows as soon as i do it freezes the pc. if i turn the pc and 360 on at the same time the pc wont go past the splash screen..

Check if your via card is inserted right and all the way. I would remove the VIA card, Take a brief look to see its condition put it back in MAKING SURE THAT IT IS CORRECTLY IN PLACE and plug the sata cable is in firmly and try try again good luck

My MS25 locks up my computer at the bio's loading screen when i try to reboot it into the iPrep boot disk.
The way i get around it is to start iprep with the Connectivity kit turned off.
Then after iPrep is fully started I power the Connectivity Kit on and it bypasses the lockups.
Maybe try starting the app/iprep before you power the connectivity kit on?

It still sometimes hangs but that lasts like 10 seconds max. Usually, if any, less than a second.
My computer also seems picky and tries to lockup when i try to dump the FW more than once per iPrep launch.
I just have to start iprep again to fix that.

ceril wrote:im going to try a diffrent card today see if that fixes it. there really isnt much to it.
when i turn the 360 on be it in dos or windows as soon as i do it freezes the pc. if i turn the pc and 360 on at the same time the pc wont go past the splash screen..

keep in mind man
that you dont hook any thing up to the computer till after you have booted all the way in dos and are at the iprep start screen.
then you hook up your sata and power on the dvd drive.
no before.