Page 1 of 1
need help via dosflash
Posted: Tue Apr 07, 2009 2:07 pm
by peacock
hi guys...im flashing my liteon drive via dosflash....have made bootable flash drive...when in dos....i type in
"l-o-eras.exe d000"
i get status FF80
i then type in again "l-o-eras.exe d000"
im suppose to get satus "FF72"....but i get "FF80" again.........im sure i had this problem before but cant remember what i done to get it right...can someone please adise me again....ta,
Re: need help via dosflash
Posted: Tue Apr 07, 2009 2:34 pm
by iamwatt
is this all you've done? did you dump the drive?
Re: need help via dosflash
Posted: Tue Apr 07, 2009 2:40 pm
by peacock
iamwatt wrote:is this all you've done? did you dump the drive?
yes mate.i did dump the drive, now its been erased as well..ive got all the key, enquiry and identify ..made the hacked firmware......made the bootable flash drive using 8.8iprep...when i made the bootable flash drive using 8.8.....i loaded all the firmwares, samsung,benq and liteon.....however when i copied the contents of the DOS folder from ixtreme 1.5 it said some files like "dosflash" already exist do you want to replace ....?.....i choose "yes"......i also put onto the root of the usb flash drive my liteon cfw.......booted into dos........and you know the rest?..........im sure its something to do with "cd dos" command as i remember...
Re: need help via dosflash
Posted: Tue Apr 07, 2009 2:58 pm
by Shootsteel
i then type in again "l-o-eras.exe d000"
Make sure your drive is on
Do that again and again...sometimes it takes multiple strikes to hit your drive
Re: need help via dosflash
Posted: Tue Apr 07, 2009 2:59 pm
by Shootsteel
let us know if you get it sorted
Re: need help via dosflash
Posted: Tue Apr 07, 2009 3:03 pm
by peacock
Shootsteel wrote:i then type in again "l-o-eras.exe d000"
Make sure your drive is on
Do that again and again...sometimes it takes multiple strikes to hit your drive
ive done that about 15 times keep getting the "FF80" status..........the usb cable doesnt need to be connected does it ?...as i have not connected it to the ck3 when doing this with iprep ?..
Re: need help via dosflash
Posted: Tue Apr 07, 2009 3:41 pm
by peacock
bump...anyone ?
Re: need help via dosflash
Posted: Tue Apr 07, 2009 5:51 pm
by leedo55
this happened to me to erasing a lite on in dosflash when i had already erased it using jungle flasher.
i think i skipped the erase bit in dos flash and went straight to write and got the 72 status just before the write by turning the drive on and off when it tells you to if i remember correctley
Re: need help via dosflash
Posted: Tue Apr 07, 2009 6:55 pm
by peacock
somehow managed to struggle my way through it...got it flashed with 1.5 ixtreme....however since my xbox was open id thought id flash 1.52 ixtreme...but more problems...see my other post..
Re: need help via dosflash
Posted: Tue Apr 07, 2009 8:01 pm
by Shootsteel
Nice work on that
Re: need help via dosflash
Posted: Wed Apr 08, 2009 10:34 am
by CoFree
peacock wrote:somehow managed to struggle my way through it...got it flashed with 1.5 ixtreme....however since my xbox was open id thought id flash 1.52 ixtreme...but more problems...see my other post..
there is no v1.52
Re: need help via dosflash
Posted: Wed Apr 08, 2009 5:49 pm
by peacock
CoFree wrote:peacock wrote:somehow managed to struggle my way through it...got it flashed with 1.5 ixtreme....however since my xbox was open id thought id flash 1.52 ixtreme...but more problems...see my other post..
there is no v1.52
sorry i meant 1.52...........would using an older jf version make any difference....i used 0.26 should have tried .43beta?..........
Re: need help via dosflash
Posted: Thu Apr 09, 2009 11:28 am
by CoFree
1.52 ....what
i dont know even what that is.
the new jungle flasher is v1.55
they jumped from v1.51 to v1.55
maybe that is what you are talking about
Re: need help via dosflash
Posted: Thu Apr 09, 2009 1:27 pm
by peacock
sorry again....i must learn to read what i type..lol.....i meant to say 1.51 ixtreme firmware..........