Robin Hoods Playground

flashing the samsung get the green success drive key copied but when i press enter for the next part get the message no atapi device present i dont know whats happening i dont normally have a problem doing this but i also got a prob doing a lite on so have i got a prob with either my c/k3 kit or with my sata card can anyone help thanks

jimbojimjay wrote:samsung get the green success drive key copied

well as long as firmtool run and made your "cfw"
then thre hard part is done
make sure to save a copy of the backup folder
at least one place off your pc.

jimbojimjay wrote:when i press enter for the next part get the message no atapi device present

well man
im not understanding why you are hitting enter.

have a look at the video
http://www.robinhoodsplayground.com/for ... 195&t=3558" onclick="window.open(this.href);return false;

if you have powered down to backup your firmware
when you reboot on the flash you would just go to the fsam 1234567 12345 command

sorry i didnt make it clear after i boot back into dos to do the fsam 1234567 12345 thats when i press enter and get the message no atapi device present i have just tried to do it in j/f and when i get to the read part i get invalid status oxfo so im now starting to lose it i feel like throwing it out the window do you think i have a problem with my sata card or even the c/k3 im grabbing at straws now thanks for any help you can give

well
something has happened
the pc is not seeing the drive.

will it play a orig game now.

no i was getting e64 so tried it again and yes it worked i didnt do anything diffrent so i dont know what is happening the thing is ive got a lite on to do but worried if it acts up again im picking up a new c/k3 tomorrow hope that sorts it thanks for your help