Robin Hoods Playground

Im attempting to flash my new xboxs lite-on dvd drive.
When i go into iPrep 008.8 and type "dLit 1234567 12345" i get this:


After pressing any key to continue this happens:


What am i doing wrong?

crap man
i dont know
ive not even look at v8.9

after tomorrow you will see why.

Rhpg's Iprep v9

CoFree wrote:crap man
i dont know
ive not even look at v8.9

after tomorrow you will see why.

Rhpg's Iprep v9

Whats v8.9?

i had that problem too using iprep try using jungle flasher to flash the drive

strykr535 wrote:i had that problem too using iprep try using jungle flasher to flash the drive

Cant, im using vista 64bit.

Did this also happen to you with a lite-on drive?

Hopefully what cofree is saying is iPrep v9 is coming out tomorow.

Also if its any use im using xtractor 360 with probe.

hey man you might have that problem because iprep isnt supposed to be formatted from a 64bit OS

get your hands on a 32bit OS and u might lose the problems

I don't know about that one. Unless it's version specific. I did a flash drive with windows 7 64 bit about a week ago and it worked fine.

Backslash wrote:hey man you might have that problem because iprep isnt supposed to be formatted from a 64bit OS

get your hands on a 32bit OS and u might lose the problems

OS bit doesnt matter since its booting dos.
My CPU supports both 64 and 32 bit.
Also i have successfully flashed Samsung drives with it.

no man ok i guess its fine but what i meant is that you format / load the iprep files to the usb from the OS and that could give u problems maybe maybe not...

Backslash wrote:no man ok i guess its fine but what i meant is that you format / load the iprep files to the usb from the OS and that could give u problems maybe maybe not...

Ohh i see what you mean.
Possibly but i doubt it, it formats the disk in FAT32.

Format it with just FAT and see if it will work.

sadalius wrote:Format it with just FAT and see if it will work.

Can i set iPrep to format it FAT?
If i normal format it it wont be bootable.

It only does that with the dLite command.
dSam and and fSam work perfectly.

xXxnottaxXx wrote:

strykr535 wrote:i had that problem too using iprep try using jungle flasher to flash the drive

Cant, im using vista 64bit.

Did this also happen to you with a lite-on drive?

Hopefully what cofree is saying is iPrep v9 is coming out tomorow.

Also if its any use im using xtractor 360 with probe.

yes it was a liteon

iPrep 008.9 now has a FAT or FAT32 option.


Going to give this one a shot.

UPDATE:
No luck, still the same command screen with both FAT and FAT32.
Would it do this because its not finding the liteon?

Any word on when iXtreme 1.6 is coming out?
Apparently BenQ's ix1.6 is already complete and in testing.

I've tried it on 4 different machines (2 xp 32bits, 1 Vista 64bit, 1 Windows7 64bit)
Same result on each machine.