RHPG's Iprep v9

[conan281]

does the new RHPG's Iprep v9have full support over the 1.51 ixtreme firmware

[CoFree]

worked fine for me when i updated a lite-on.
it dont dump from the sata though
you still have to get the dump from the rs232 cable

[conan281]

cool as long as we have the tools and knowledge we can still make this happen one question cofree have you flashed a hitachi v79 with the new 1.51 firmware

[CoFree]

no

[wishka]

cofree do when reflashing a sammy benny or liteon with newer firmware do i follow the same steps.
-wishka

[technoe]

iPrep does a good job of walking you through the steps for each drive but if you get confused you should check out our tutorials section.

Tutorials.

[wishka]

i really meant to ask when reflashing a sammy benny or lite w/ iprep would i follow the same exact steps as in cofrees video tutorials? thanks a lot cofree

[CoFree]

yea man
you do
if you are reflashing a samor benq
you do it just like it has never been flashed.
as long as you have a backup of the firmware with a good key you can do it just like the video and not reboot
you can go right to the reflash.

with the lite-on you do it the same also
but
there is a small point here
if you soldered the r707 point it will not work
you have to use a probe on a lite-on reflash
other than that
its the same as if it was never flash.

[conan281]

cofree i have a problem im using the probe but my lite-on wont dump im using iprep v9

[technoe]

Is it a new lite-on? If so you must dump through the serial cable using the CK3.

[CoFree]

cofree i have a problem im using the probe but my lite-on wont dump im using iprep v9

first man
you are hijacking someone elses thread
its not a big deal but its kind of rude.

yea
technoe is right
but we could use a litte more onfo man
go into the steps you are taking
you can just start your own thread and go into detail about what you are doing.

[conan281]

thanks for the heads up cofree

[ghetto1]

hey cofree1234 or anyone ...pleasee help im noob...what do i do before i flashing my lite-on drive....i was look cofree1234 new v9 lite-on video and i follow his vid ...and it said ERROR DUMMY KEY. pleaseee help

[ghetto1]

hey COFREE1234 or ANYONE...pleaseee help im noob ..can u post a pic of rs232 cable on...cuz i cant find a serial port cable anywhere i the store and i google it. it show me that 9pin serial port and that 25 pink hole port..(http://www.sfcable.com/cable/c/db9.html ... DQodRQH7XQ" onclick="window.open(this.href);return false;)....that the link to get rs232 cable but which one do i need? and how do i plug in from my ck3?

[dalecheesy]

http://www.sfcable.com/cable/p/D920-03.html" onclick="window.open(this.href);return false; Thats the one you need and it plugs into a comport on the back of your pc (if it has one) looks like this:

if you plan on using iprep and the r232 socket on the ck3. Just a heads up but in future make a new thread as its considered rude to hijack someones.