Robin Hoods Playground

Im trying to flash a hitachi v79 using JF
I get it into mod B then i insert the 79 unlock cd
click on 79 unlock tab then ill get
Playing 79 unlock audio cd
Failed to play 79 unlock audio cd

I burned the .bin file what could i be doing wrong
please Help

What program did you use to burn the file? I used ImgBurn and selected the .cue file instead of the .bin file. Imgburn will look at the .cue file for info on how to burn the .bin. If you didn't use that method, then I would try doing that first.

Ok im going to try that thanks
Ill report back

you burn the .cue file

OK i ust burned the .cue file using img burn
But one ? when do i insert the cd ?
After i put it into mode b or when i eject the tray to send it into mode b?

have a look at this
its not mine but it on the money.
viewtopic.php?f=195&t=2304" onclick="window.open(this.href);return false;

well if it older but
the timing is the same.

Well THANKS for all the HELP Technoe and CoFree
I burned the .cue File using img burn
Put the cd in after putting drive into mode B
then save orig FW
Then flashed the 1.51 ixtreme FW
And everything worked out PERFECT

Thanks Again

good job man

There ya go man!!

You should always keep in mind when you make/burn a disk image (if there are 2 files) the small one always contains the image info(how to burn, the name of the disk etc), and the large one contains the raw data.

Also, most things that you burn for your xbox you should be using imgburn, thats where you will get the most support.

Anyways, good to hear you got it!