Page 1 of 1

Probe and Xtractor?

Posted: Thu Apr 30, 2009 1:06 pm
by petrieslastword
I've flashed other drives, but not yet a liteon. I'm trying to wrap my head around it, but there's all this back and forth about what to get to find your key, and where to purchase it from. At the end of the day, what's going to get the job done with the best bang for my buck? My BenQ seems to be shot after a little mishap where I blocked the fans and then became busy, so now it's got all 3 rings, so my had is forced with regard to getting this done.

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 2:56 pm
by CoFree
well you can use iprep or jungle flasher
if you are running a via chipset sata card i would use iprep
if not jungle should work fine.

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 3:01 pm
by Shootsteel
petrieslastword wrote: My BenQ seems to be shot after a little mishap where I blocked the fans and then became busy, so now it's got all 3 rings, so my had is forced with regard to getting this done.

You do know that the red rings have nothing to do with the drive...more than likely your drive if it was good prior to red rings will be fine after red rings.

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 3:35 pm
by technoe
I use the CK3 with probe purchased from http://www.modchip.ca" onclick="window.open(this.href);return false;. They have the best shipping even it is a little bit more than the other guys. And THE BEST customer support if you have any issues.

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 3:46 pm
by petrieslastword
Shootsteel wrote:
petrieslastword wrote: My BenQ seems to be shot after a little mishap where I blocked the fans and then became busy, so now it's got all 3 rings, so my had is forced with regard to getting this done.

You do know that the red rings have nothing to do with the drive...more than likely your drive if it was good prior to red rings will be fine after red rings.
I do know this, however I any new 360 purchased will most likely be a liteon, and as I'm thinking I ruined my Benq (tried to do the trick where you overheat it by stopping the fans with toothpicks, then my girl decided she wanted to fool around, got distracted, and when I returned I turned it on to one red ring, then turned it off and on and have since had 3) I'm going to have to flash a new 360 it seems.

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 3:48 pm
by petrieslastword
technoe wrote:I use the CK3 with probe purchased from http://www.modchip.ca" onclick="window.open(this.href);return false;. They have the best shipping even it is a little bit more than the other guys. And THE BEST customer support if you have any issues.
Any chance you could link me to the specific item either here or through pm, there's a few different ones and I don't want to get the wrong thing.

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 3:50 pm
by iamwatt
lol! smh! tell your girl to be easy while you modding. . .

ck3 pro
probe

Re: Probe and Xtractor?

Posted: Thu Apr 30, 2009 3:50 pm
by technoe
Here's the probe - Probe

Here's the CK3 Pro - CK3 Pro