Robin Hoods Playground

Ok guys here is a puzzler, to me anyways.

I have a dedicated not hooked to the internet dell with via card flashing flashing workstation that I use for sammys and Benq's...well yesterday I go to flash a benQ...no Joy...It can't identify the flash chip...???...ok try again....no joy....I reach uder the counter and grab another ben...same result...grab 3 more...no dice...grab a sammy....good to go no problems flashed, works, plays backups. Ok I install my new back up identical via card, new sata, new ck3, new everything...same computer. It will flash sammys now but not Benq's. I can not even count how many Benq's this computer has flashed....What up with this situation any ideas? Very interesting.

I had this problem with the 360 MOD Cd. It would only see Samsungs, it wouldn't see any other drive. I had to power down my PC completely, power on the drive have the benq already halfway out, turn on pc and boot to cd. Even doing that it was a 50/50 shot to get it to connect.

have you tried othe programs
iprep ,jungle flasher, 360 mod disc.
i dont see where you said what program you used to flash benq

Sorry about the omission I use iPrep for the sammy and Ben's....like I said has worked, for 100's of drives now all of a sudden no more benq. I just dont get it...I have had to change computers before just not for this reason...was wondering if anyone might have had a similar experience.

hmmm
man i have not had any trouble with iprep on benq

try a different iprep.
older or newer
not sure which one you are running
the lastest is rhpg iprep v009

the oldest one i would try to use would be v6.2

This is the first and most likely last post from my new iPrep dedicated computer....gonna take the old one and redo it all and use it for a back-up...thanks for the help...not something I have experience before so i figured I would share.

so did you get it working
or what

aaaaaaaarrrrrrrrrrrggggghhhhhhhhhhh!!!!

Will not boot from the thumb..did i mention i hate/love M$?

A buddy just showed up with a donor machine he wiped clean for me...gonna set this one up...will let you know.

Damn man, you're having one helluva time!! Good luck!!

All is well and good here now.....old one is back up and running and I now have a back-up...weeee . Will be working on the back up for the other (JF) computer this week...Thanks for all the support through this very troubling time....

well man
did you get all the stuff going
and what did you do to get it going

damn you are one of the guys
to be having that hard of a time
give it up
what did you find was the thing
or what did you do to get it all going.

Well I am not so sure that why the iPrep computer went down in the first place but what I did to fix her was take out the via card put in another in a different slot install it then take the new one back out and put the old one back in it's original slot and then install that one....viola she's humming right along now. It was perplexing why it stopped seeing the Benq's in the first place as it's just a dedicated do nothing but flash computer, no internet hooked up, workhorse. I have had one go down after a power irregularity prior to this. Easily solved though as it was obvious. This was a new "condition" that I have not run into before, a fidgety via...