Page 1 of 2
LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:07 am
by bigfish58
Well after a bad flash, my drive is seriously stuck in 0x80 status. I have tried to do the dos l-o-eras method, but no matter how long i do it for, it still says the same thing.
I have also tried with jungleflasher, but that can't seem to get it out of 80 either.
Any help would be much appreciated!
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:16 am
by iamwatt
when you get that status have you tried hitting the esc key?
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:23 am
by bigfish58
When using the l-o-eras 16 bit version?
If so, that dosen't do anything?
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:27 am
by iamwatt
is your lite-on drive locked up or does the flashing process get stuck at that status. because those are two different things.
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:31 am
by bigfish58
Nono, I TRIED to flash it, and the firmware wouldn't upload, so I have like a half erased drive and I cant get it to fully erase.
Here is the JF log;
Code: Select all
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.55 Beta
Session Started Mon Apr 27 20:52:53 2009
This is a 32 bit process running on 2 x 32 bit CPUs
Found 4 I/O Ports.
Found 2 Com Ports.
Found 4 windows drives.
Found 0 CD/DVD drives.
Sending DVDKey request to I/O port 0x8C00 and COM3
................ Serial Data looks ok, key returned: 5559680B47E750D1E281DE024F7C66EA
................ Serial Data looks ok, key returned: 5559680B47E750D1E281DE024F7C66EA
................ Serial Data looks ok, key returned: 5559680B47E750D1E281DE024F7C66EA
................ Serial Data looks ok, key returned: 5559680B47E750D1E281DE024F7C66EA
................ Serial Data looks ok, key returned: 5559680B47E750D1E281DE024F7C66EA
................ Serial Data looks ok, key returned: 5559680B47E750D1E281DE024F7C66EA
Extracted drive key matched 6 times.
Key data saved to C:\Users\Andrew\Documents\Key.bin
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 37 34 38 35 30 43 41 30 - 41 31 44 36 30 38 43 47 74850CA0A1D608CG
0030: 38 33 30 38 31 34 30 30 - 46 45 31 20 20 20 00 00 83081400FE1 ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Inquiry String saved to C:\Users\Andrew\Documents\Inquiry.bin
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 38 - 43 47 38 33 30 38 31 34 ....D608CG830814
0020: 30 B0 46 45 31 20 20 20 - 00 00 00 00 00 00 34 37 0.FE1 ......47
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 1C 3F 7E CA ..x.x...x....?~.
0090: 27 50 C0 49 40 0B B6 DA - 3B F7 CF 8A 68 01 A0 6C 'P.I@...;...h..l
00A0: D2 16 88 09 4A F7 12 2F - 53 88 4C 39 25 B7 33 54 ....J../S.L9%.3T
00B0: A3 4E 04 41 .N.A
Identify String saved to C:\Users\Andrew\Documents\Identify.bin
0000: 44 36 30 38 43 47 38 33 - 30 38 31 34 30 30 46 45 D608CG83081400FE
0010: 31 20 20 20 FF FF FF FF - 38 47 30 35 30 39 36 32 1 ....8G050962
0020: 31 37 44 34 31 34 58 58 - 41 30 FF FF 53 34 50 38 17D414XXA0..S4P8
0030: 37 32 31 30 30 30 30 30 - 30 37 38 32 31 33 00 00 72100000078213..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..
Dummy.bin file saved to C:\Users\Andrew\Documents\Dummy.bin
Loading DVDkey source file
Inquiry string found
Identify string found
DVD key found @ 0xA030 key is 5559680B47E750D1E281DE024F7C66EA
Firmware is a Lite-On Dummy OSIG: PLDS DG-16D2S 7485
Firmware type is: DVDKey32 extract
Auto-Loading target file C:\Users\Andrew\Desktop\JungleFlasher v0.1.55 Beta\firmware\ix151-liteon.bin
Target File MD5 hash is: 933ed9c64d5839c69628059fc1e2806d
Genuine Lite-On iXtreme 1.51
Inquiry area found
Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA
Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 7485
Firmware type is: iXtreme v1.51-12X
DVD Key copied to target
Inquiry string copied from Source to Target
Identify string copied from Source to Target
Serial strings copied from Source to Target
Target f/w saved as: C:\Users\Andrew\Documents\Lite_CFW.bin
Sending Lite-On-Erase request to port 0x8C00
..............
Drive returned Status 0x0
.....
Serial flash found with Status 0x72
Sending Vendor Outro to port 0x8C00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x8C00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x8C00
Writing target buffer to flash
Writing Bank 0: .
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Getting Status from port 0x8C00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x8C00
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
DVD Keys are already the same
Inquiry strings identical
Identify strings identical
Serial data is the same
Getting Status from port 0x8C00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x8C00
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.55 Beta
Session Started Mon Apr 27 23:02:37 2009
This is a 32 bit process running on 2 x 32 bit CPUs
Found 4 I/O Ports.
Found 2 Com Ports.
Found 3 windows drives.
Found 0 CD/DVD drives.
Loading Source File C:\Users\Andrew\Documents\Dummy.bin
Inquiry string found
Identify string found
DVD key found @ 0xA030 key is 5559680B47E750D1E281DE024F7C66EA
Firmware is a Lite-On Dummy OSIG: PLDS DG-16D2S 7485
Firmware type is: DVDKey32 extract
Auto-Loading target file C:\Users\Andrew\Desktop\JungleFlasher v0.1.55 Beta\firmware\ix151-liteon.bin
Target File MD5 hash is: 933ed9c64d5839c69628059fc1e2806d
Genuine Lite-On iXtreme 1.51
Inquiry area found
Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA
Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 7485
Firmware type is: iXtreme v1.51-12X
DVD Key copied to target
Inquiry string copied from Source to Target
Identify string copied from Source to Target
Serial strings copied from Source to Target
DVD Keys are already the same
Inquiry strings identical
Identify strings identical
Serial data is the same
Target f/w saved as: C:\Users\Andrew\Documents\Lite_CFW.bin
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:39 am
by iamwatt
can you physically open the drive? if so you didn't need to do the l-o-eras method.
i didn't see that you were using jungleflasher, also with that it doesn't show that it found a cd-rom drive.
what's ya setup? do you have a connectivity kit of some sort? are you using you're on board sata port or a via card?
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:44 am
by bigfish58
Right, I tried to erase and flash with jungleflasher, and it went wrong. So I figured I would try and reflash it with jungleflasher, evidentally it didn't work, so I then tried with dosflash32, that didn't work either because there is no drive recognised under windows.
I then resorted to the DOS method (l-o-erase). I have flashed like 50 drives before using my onboard SATA controllers, so it is nothing to do with hardware compatibility.
I have the CK3 PRO with probe. And no, i can't open the drive with the computer, but i can open it manually.
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:51 am
by iamwatt
yea, the drive opens so you shouldn't of did the l-o-erase. you started with jungleflasher you should of stuck with it. boucning around from programs may mess you up.
viewtopic.php?f=195&t=3357
i say start over, you're main thing is that you want to see jungleflasher read the drive, it should show a number next to cd/dvd roms found. once you see that then you should be good to go.
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 9:55 am
by bigfish58
But, there is NO firmware on teh drive, so windows won't recognise it...
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 10:04 am
by iamwatt
i don't know about all that windows not recognizing it stuff. . . meaning i doubt that's a valid claim. but i use iPrep. is this a fresh drive that you're flashing? or an update?
if you're having a hard time with jungleflasher then i would say try iPrep.
viewtopic.php?f=195&t=5130
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 10:05 am
by technoe
Windows doesn't have to recognize the drive, just Jungle Flasher. I'd say your best bet as this point is to build the cfw with jungle flasher and do your flashing with iPrep. To do this check out
this tutorial..
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 10:37 am
by bigfish58
Either way, it just won't goto the right status
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 12:57 pm
by CoFree
if you hit the eject on the ck3 will it eject (no the pc,or by hand)
if it will not then you will have to do the recover
that is the only way
if you cant get it to work right
before you totally brick you may want to drop sadalius a pm.
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 2:37 pm
by bigfish58
Nope, the CK eject dosen't do anything :/
Re: LiteOn STUCK in status 0x80 (FF80)
Posted: Sun May 03, 2009 4:15 pm
by lilrevuk
Out of the 50 flashes you've done with your onboard sata, how many lite on's have you done??
IMHO this seems to be something to do with sata... One good thing about these drives (providing you have a good key in your dummy.bin) is that they are designed to be flashed without any firmware on the drive, but you do need it to report 72 before you can flash...
I presume you're running L-O-E from an iprep flash? Try turning the drive on and off in between attempts, this has helped me in the past. Just out of interest, what chipset is your onboard running? One thing that's important is to ensure your sata is running in Legacy (IDE) mode, which is a setting in your BIOS... If you can't get it with that, it may be worth trying it with a VIA card like the one in my sig... You may have to do
this to get it working correctly with Jungle Flasher...
Hope you get it going