Robin Hoods Playground

I have a friend that has a ms28 in his xbox 360 and the drive went bad, i have the key and everything(for the MS28) and i was wondering if there was a way to change out his ms28 to a benq drive. Someone please help as soon as you can, thank you

Yeah, that's pretty simple. You should use Jungleflasher for that.

Since you already have the original firmware all you need to do is
Plug in your benQ do the half open trick, power it on
Open up jungleflasher
go to the firmware 32 tool tab,
Load your Samsung firmware into the source
then load up your hacked BenQ firmware into the target then click
Spoof source to target
click MTK flash 32 tab
Click Intro/ Device ID follow the prompt to put the drive into vendor mode
then click write.
Click Outro/ ATA reset
that's it.


But you may want to wait a day or two, until iXtreme 1.6 comes out. Should be available in the next day or two hopefully.

as long as you dont have a via chipset
then jungle should work fine

if you have a via 6421a or l pci sata card

then i would use a combination of the 2 programs.
use jungle flasher to build your hacked / spoofed firmware
and save it
but that would be all
to flash it in the benq i would use iprep
after you have your hack/spoofed firmware

do this
make a iprep boot flash
in the backup folder make a folder named 1234567
then in that folder make a folder named 12345
in there put the hacked/spoofed firmware that you renamed to ' bencfw.bin "
with out the " " of course
then just flash it in like normal
by just running the fben 1234567 12345

See that is why i love this site over all of them. You guy`s are so good to all of us and answer the questions that we have fast and answer them right. You guy`s know what you are talking about. If there is anything that i can ever help you guys with or do for you, just let me know and i would be glad to help....................

glad you like the site man

hang out and help make it even a better place

I tried both ways that both of you said and both work really well, just for something to do on my free time.(lol) But just so that everyone one the site knows that both way worked for a ms28 to a benq and a lite-on to benq.....