Robin Hoods Playground

hello guys. I have my xbox 360 flashed on lite-on drive. And i need to upgrade it to 1.6 firmware.

1 is it secure to do it?, Will it be any problem in the future?
2 Can i do it with iprep 0.009?
3 Do i only need VIA sata card and connectivity kit v3 pro and a Probe?

Gony wrote:hello guys. I have my xbox 360 flashed on lite-on drive. And i need to upgrade it to 1.6 firmware.

1 is it secure to do it?, Will it be any problem in the future?

Yes. There shouldn't be. Just make sure that your games are backed-up correctly.

2 Can i do it with iprep 0.009?

Probably should use RHPG Iprep v9

Video tutorial Here: http://www.robinhoodsplayground.com/for ... 195&t=5130" onclick="window.open(this.href);return false;

3 Do i only need VIA sata card and connectivity kit v3 pro and a Probe?

Yes that should take care of it.

Alright thnx.. . Do i need to use the probe again?
Or just follow the tutorial from the beginning intill the end?

with iprep and a lite-on
reflash you will need to use the probe again

with reflash i mean to upgrade from 1.5 to 1.6

yep
if you are using iprep to flash a lite-on
do it just like the first time
dump then flash

i follow the video tutorial with RHPG iprep v9 you made:D

I will buy this : http://www.mrmodchips.co.uk/catalog/pro ... 344741de80" onclick="window.open(this.href);return false; and this http://www.mrmodchips.co.uk/catalog/pro ... 344741de80" onclick="window.open(this.href);return false;

do i need anything more mate?

that should do it
the rest you should be able to get from here

alright when i get the stuff, what is the first thing i'm going to do before is start flashing?

I heard that i need to Download drivers to the via card and the ck3.

when you get your pci sata card
it should come with a driver disc
just load the drivers from that.

then have a look at this.
http://www.robinhoodsplayground.com/for ... 195&t=5130" onclick="window.open(this.href);return false;

to get rhpg iprep to load the new 1.6 firmware you need to update the def file in it

have a look at this
http://www.robinhoodsplayground.com/for ... 131&t=5574" onclick="window.open(this.href);return false;

and no update or downloading drivers for the ck3?

no

thnx do you have some pictures or a movie just showing how to connect everything up. Or could just say to me which things should to go and so on. Beacuse i burned my Ck3 Lite and i don't wan't do it again


Thnx for all help CoFree and all you other guys for this.

I would put a little dot with a permanent marker on the top of the power cable, little tabs up. I even do this for the power cable that I take off the drive. just makes it safer when putting it back together.