Robin Hoods Playground

i tried using iprep 9, but after the flash my drive boots up but doesn't play original games nor my back ups. what should i do? do i have to restore to factory ? if so how? thanks in advance. i do have my original firmware and hacked ixtreme 1.4 thanks for the help

Well as long as you have to original you can confirm whether or not is has a good key. To do this open Jungle Flasher and on the FirmwareTool 32 Tab click load source firmware then select your OFW (Original Firmware). Once you've done that I suggest you load the latest firmware either 1.51 or 1.6. Either one will let you play the latest games although 1.6 was just released I'd still suggest you wait a few more weeks for it to be truly tested. Then spoof source to Target and save to file. You can then either rename the file to bencfw and place it in your iPrep thumb drive and flash that or continue to use jungle flasher to flash your benq. But as long as you've got a good key you haven't bricked your drive yet.

ok thanks i think i will try doing it in jungle flasher i have done all you have stated and the firmware is correct now what should i do next from mtk flash?

doesn't seem like jungle flasher is working it just keeps freezing

can someone advise on the best thing to do here? im trying to flash my drive with ixtreme 1.5 but not sure which iprep to use and which files to change? i have used the jungle flasher to spoof the firmware with 1.5

Well are you going to 1.5 or 1.6? If 1.6 then you need the new RHPG Iprep 9 Found here: viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;

Then when you install that you need to go into the C:\Program Files\iPrep\Resources and replace the ixdef.xml file with this one: viewtopic.php?f=131&t=5574" onclick="window.open(this.href);return false;

Run Iprep and make your USB Flash Drive as you normally would and select the firmware that you created in JF for the BenQ iXtreme. Then reboot into dos from the USB drive and follow instructions. Make sure that you take your time and follow the instructions. Anymore questions just post up and one of us will help.

i had the original fw so i spoofed it in jungle flasher then did a dos flash in iprep thanks for the help guys

same thing happened to me....

your method worked dude! thank you