Robin Hoods Playground

Hi

I flashed my liteon from FW 1.5 to 1.51 and now I can boot the Wave 3 games but after a while an error says that the disk is unreadable.
Can it be a bad flash?
I must mention that the wave 3 games that I tried are copies from a Kreon drive ( Metallica )and downloaded also ( Metallica & Sacred 2 )

We don't talk about downloaded games here. It's one of the rules. Simply put, if the console boots a backup, it's not the flash. You did good on that part if it boots a backup at all. The thing to look at next would be the media.

Thanks for the fast reply

all my old games work flawlessly. I have only problems with the wave3.
what can I do about that.
I saw that many people have problems with the FW 1.6 with the liteon drive. Do you suggest that I should wait or will it be a good step if i flash my liteon drive with the FW 1.6
Thanks

Like sadalius said usually when you get that error you might wanna start looking at your media..what kind of discs are u using?? how fast are you burning the iso to the discs??

Verbatim +R DL 2.4x and 2x

might be my burner also even if there is no error messages when burning using imgBurn 2.4.2.0
I will try to burn an iso with another burner if I can borrow one from a friend

allotesting wrote:Verbatim +R DL 2.4x and 2x

might be my burner also even if there is no error messages when burning using imgBurn 2.4.2.0
I will try to burn an iso with another burner if I can borrow one from a friend

stick w/2x & verify the written data, that's what i do however problem may just be in the drive itself or bad batch of media despite the fact you are using the correct media. who knows until you try.

HAZ3 wrote:& verify the written data,

that is not needed
it will just make it take longer

If your old games boot fine and your only having trouble with 3rd wave games, are you 100% sure you flash it with 1.51?

Hi

JUst checked the jf.log and giving:

Auto-Loading target file D:\traiter\Game tools\XBOX360\1.51\JungleFlasher.0.1.51.Beta\JungleFlasher v0.1.51 Beta\firmware\ix151-liteon.bin

So the drive has been flashed with IX1.51-liteon.bin

So I wonder what would be the problem

wow
got me man

unless your wave 3 games are not good for some reason

Don't you think that It can be a bad burn (Burner problem).
Didn't have time to check with another burner.
So If I understood well, this problem can't be a IXtrem flash problem?

allotesting wrote:well, this problem can't be a IXtrem flash problem?

not as long as you know for a fact
you flash in v1.51 or v1.6

allotesting wrote:Don't you think that It can be a bad burn (Burner problem).

well the other backups are working
so no i would say not
the burner will not know the difference in a wave 2 or wave 3 iso

Yes the other backups are working but were burned a while ago, so something might turned wrong meanwhile.
So what do you think about this

man you can try a different burner
maybe a different pc

Tried the same exact isos with another burner (LG) and everything is OK.
So apparently it was a problem with my burner (It is a Sony)
Thanks everybody