Page 1 of 1

ixtreme 1.6

Posted: Mon Jun 01, 2009 12:30 pm
by Hexadecimal_7
Hey, I have been out of the loop for a while and haven't been updated in months on the new firmwares so I was just wondering what this latest version helps with. I have read the info on it but only understand a minor bit. Could someone please clarify the 1.6 update in a few words if you have time? Thanks for any replies.

Re: ixtreme 1.6

Posted: Mon Jun 01, 2009 12:54 pm
by commando_lee
Hexadecimal_7 wrote:Hey, I have been out of the loop for a while and haven't been updated in months on the new firmwares so I was just wondering what this latest version helps with. I have read the info on it but only understand a minor bit. Could someone please clarify the 1.6 update in a few words if you have time? Thanks for any replies.
Hope this is some use to you

also have a look at this thread as well,

viewtopic.php?f=0&t=5890" onclick="window.open(this.href);return false;

IXTREME 1.6

Team HyperX Presents IXtreme 1.6 firmware for Benq, Samsung and Liteon drives
------------------------------------------------------------------------------

IXtreme fw for Benq, Samsung and Liteon drives!


Features
--------

-Strict Wave 3 compliance! hybrid (modified disks) will not boot!

-Strict drive speed compliance - 12x only for game discs!

-Support for SS V2!

-Integrated 0800 for game dumping including SS v2!

-Full support for all known game exceptions! eg ddr etc!

-One shot boot mode! - allows a one off boot of gamedisc without -stealth/partition checks (will still use stealth), use activate.iso disk to activate each time!

-Support for easy drive key/version info cmd, same as liteon!

-Strict stealth/wave checking, one shot boot mode will boot wave(x)!


More Info
---------


Strict Wave 3 compliance means wave 3 games will only boot if they have correct PFI/DMI/SS and timestamp for wave 3

Strict drive speed compliance means games will only boot if drive is set for the initial speed of 12x, any modification of this make games fail to boot

SS v2 suports multiple timing samples for challenges type 5 and 7 , stroing them in the SS. This is a pre-requiste for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.

With drive in Windows mode (Tray half open on powerup) 0800 mode is activated allowing easy dumping of game disc including SS v2. In this mode the drive is also able to output drive key, fw version and drive type by using a simple custom inquiry command.

Game exceptions are integrated in the fw for games that do not comply with the strict wave checks but are legitimate. These are Dance Dance Revolution Universe, Stoked, Ping 17 disk, afro samurai

One shot boot mode allows you to boot a Wave X or non stealth game by using the activate.iso disk as a flag. Just insert the activate disc and the next disc inserted will boot without any strict checks. This will still utilise full stealth if available. As soon as that disc is booted the flag is cleared, and you will have to re-insert the activate disk again to enable one shot boot. As always use with caution.

EDIT

link added

Re: ixtreme 1.6

Posted: Mon Jun 01, 2009 2:24 pm
by Hexadecimal_7
Right, thanks for your help. Also, are there any games that are out right now that require the 1.6 version to run or can I still use my 1.51 version as I have the Hitachi drive and 1.6 is not out for it yet, and would it be safe? Thanks again!

Re: ixtreme 1.6

Posted: Mon Jun 01, 2009 2:30 pm
by commando_lee
Hexadecimal_7 wrote:Right, thanks for your help. Also, are there any games that are out right now that require the 1.6 version to run or can I still use my 1.51 version as I have the Hitachi drive and 1.6 is not out for it yet, and would it be safe? Thanks again!

1.51 will let you play the wave3 games, so there aint nothing out at the moment. 1.6 just lets you connect your drive up tro a pc to dump your original games.

Nothing is 100% safe there is always a risk in playing backups if you dump your games your self and have all the stealth files you should be ok but there is always a risk you could get banned

Re: ixtreme 1.6

Posted: Mon Jun 01, 2009 2:33 pm
by Hexadecimal_7
Oh sweet, so 1.6 is basically a substitute for a kreon drive?

Re: ixtreme 1.6

Posted: Mon Jun 01, 2009 2:39 pm
by commando_lee
Hexadecimal_7 wrote:Oh sweet, so 1.6 is basically a substitute for a kreon drive?
Kinda, there is also the new 0800 firmware which is for a dedicated drive for ripping games, its only for Benq, Samsung, Lite-on at the moment.

This is a copy of the text file from the 0800 FW

Team HyperX Presents IXtreme 1.6 0800 firmware for Benq, Samsung and Liteon drives
----------------------------------------------------------------------------------

IXtreme fw for Benq, Samsung and Liteon drives!


Features
--------

-Common API designed for easier application use!

-Support for SS V2!

-Direct 0800 mode for game dumping including SS v2!

This firmware is =NOT FOR USE IN A CONSOLE= and is provided
with the intended use of being in a dedicated "ripping" drive.

This means:
a. Does not need your DVD key,
b. Does not need spoofing as another drive,
c. Does not need to use the tray half open and
d. Does not need to use the activate.iso to use this firmware on the pc.


More Info
---------

SS v2 supports multiple timing samples for challenges type 5 and 7, storing them in the SS. This is a pre-requisite for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.

ix16 0800 Commands
-----------------
AD 00 FF 02 FD FF FE 00 08 00 00 C0 - SS/CPRMAI

AD 00 FF 02 FD FF FE 00 08 00 ID C0 - SS Challenge ID

12 00 00 00 30 C0 00 00 00 49 58 01 - ix Cmd 1 - Dumps key and rev 0x30 bytes

12 00 00 00 24 C0 00 xx xx 49 58 02 - ix Cmd 2 - Output 0x800 bytes from ram address

12 00 00 00 24 C0 00 00 00 49 58 03 - ix Cmd 3 - Toggles Lock/UnLock Game partition