Page 1 of 1
Blaster 360 V1 VERY HARD TO PONDER QUESTION
Posted: Sat Jun 13, 2009 9:37 am
by xx0warrig0xx
ok im looking at it and i feel like getting it right? then i see theirs somekinda switch for BACKING up games how, what, can someone please explain how to backup Im extremely confused
link;
http://team-xecuter.com/blaster360/features.htm
Re: Blaster 360 V1 VERY HARD TO PONDER QUESTION
Posted: Sat Jun 13, 2009 10:37 am
by technoe
Basically with the Ixtreme 1.6 you're supposed to be able to backup and play games with the same drive. By powering on the drive with the tray half ejected it's supposed to activate the ripping mode. Using XBC 2.9 you can then hook your xbox 360 with Blaster V1 to your pc via the sata port and it should be recognized in XBC. A lot of people had problems with this with XBC 2.8 but I've heard nothing about 2.9.
Re: Blaster 360 V1 VERY HARD TO PONDER QUESTION
Posted: Mon Jun 15, 2009 10:08 am
by sadalius
As far as the blaster is concerned, there isn't a switch specifically for backing up games. It as a power switch, a modeb switch, a switch for turning on or off the glow led's, and an eject button.
Now that being said, using ix 1.6 and a blaster would make it easier to use for backup purposes. Basically, you would plug in a molex connector and your sata connector, turn the drive on, eject the tray, turn the drive off, close the tray half way, turn the drive back on and then boot your computer. All without having to take the 360 apart to get at the drive.