Page 1 of 1

flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 6:38 pm
by grandview
do i have to flash liteon back to orginal or can i just flash it straight to ix1.6? and is there any differences in the two firmwares?i'm i safe to stay with ix1.5?

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 6:57 pm
by louisM92
you cant restore a lite on to stock so no you dont lol,

1.6 give you the opportunity to dump games from the drive and allows you to play wave 3 games (the newer games),

you should upgrade to 1.6 because it is better in everyway and it allows you to play all games.

hope this helps making your decision to update or not.

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:03 pm
by grandview
do my backup games need to be burned at 12x or can i still burn them at 2.4x with imgburn...

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:10 pm
by louisM92
no you still burn at 2.4x, 12x is the speed the xbox reads the games.

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:13 pm
by grandview
thx man..im still learning..and trying to help other people...

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:14 pm
by grandview
one more thing...i still do the same steps as i did flashing the ix1.5...

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:18 pm
by louisM92
Everyone has to learn things before you know it, its hard sometimes to reply to help people if you aint too sure if your right yourself lol, you'll pick a lot up if you read and watch tutorials, thats how i learn what to do, keep it up man.

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:18 pm
by louisM92
Watch this video before reading on, it should help you.

http://www.robinhoodsplayground.com/for ... 195&t=4419" onclick="window.open(this.href);return false;

Before you click dummy from ixtreme make sure your drive is shown in the drive properties,

then click dummy form ixtreme, it should prompt you to save inquiry.bin, identify.bin, key.bin and dummy.bin (keep these safe)

then if jungle flasher asks do you want to auto load ixtreme click no,

you should be taken to the firmware tool 32 tab, if not click on it,

then click on open target firmware and load ixtreme 1.6 (can be downloaded from xbins),

click spoof source to target,

check that the keys match in both boxes and then click save to file and save the custom firmware you just created,

then proceed with flashing like sadalius does in the video.

Hope this helps you out.

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:20 pm
by grandview
sorry one more Q.....whats the activate iso for....and do the same steps right?

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:21 pm
by grandview
thx.......

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:23 pm
by louisM92
activate iso is for samsung drives you dont need it, follow what i said in my last post and you should be fine.

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:23 pm
by grandview
sorry..thx though....

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:27 pm
by louisM92
Dont be sorry and no problem, it takes some time for people to take this stuff in, in your case you seem to not want to mess up which is a good thing, if you need any more help or have anymore questions just ask and dont be sorry too :)

Re: flashing liteon ix1.5 to ix1.6

Posted: Sun Jun 14, 2009 7:33 pm
by grandview
thx.....

Re: flashing liteon ix1.5 to ix1.6

Posted: Mon Jun 15, 2009 1:57 am
by grandview
thanks for the video...it worked great...