Page 1 of 1
liteon erase power loss
Posted: Fri Jun 26, 2009 6:25 pm
by int03h
Need some info guys was flashing my liteon with jungleflasher and when I turn the ck3 off and then back on my HDD froze I watched the how too video on the fix but when I load iprep and type the l-o steps I get all fff any help would be great or if someone can point me to a how too video that has the new 1.6 firmware steps I'm sure it is something simple I'm doing wrong thanks for any help I can get......int03h
Re: liteon erase power loss
Posted: Fri Jun 26, 2009 7:18 pm
by grandview
if you are using the via chip set dont...it will freeze the computer...if you have a onboard sata hook that one.
Re: liteon erase power loss
Posted: Sat Jun 27, 2009 12:20 pm
by int03h
That's how I have it hooked up straight to the motherboard.
Re: liteon erase power loss
Posted: Tue Jun 30, 2009 10:06 pm
by int03h
anyone else with a good idea i'm still stuck on this drive.............Int03h
Re: liteon erase power loss
Posted: Sun Jul 05, 2009 4:58 pm
by int03h
Not sure what im doing wrong i keep getting all FFFFFFF in stead of FF80 any idea guys........Int03h
Re: liteon erase power loss
Posted: Sun Jul 05, 2009 5:23 pm
by rkd2398
Maybe try another sata port on the pc, or another pc. Your Iprep Flash drive should only have certain files on it.
They are : Firmtool.exe, autoexec.bat, dosflash.typ l-o-earse.exe, and the custom firmware - lite_cfw.bin.
Make sure that these are on the flash drive and watch the video and try again.
Re: liteon erase power loss
Posted: Sun Jul 05, 2009 7:03 pm
by int03h
Just wanted to thank you guys for the help got it using the dos flash 32 way first time i used it but got it working..........Int03h
Re: liteon erase power loss
Posted: Mon Jul 06, 2009 8:20 pm
by rkd2398
Good Job man!!!