Page 1 of 1

lite-on shows dvd screen after flash Please Help!

Posted: Wed Jul 29, 2009 9:57 pm
by gatorlee
I flashed the lite-on per jungleflash key came out the same key every time verified. I built the cfw and I go to flash in mtk flash, lite on erase, then write in writes and then it verifys. I test it the tabbed dashboard works fine but no games work wav 3 wav 2 and i tried an original xbox game it gives the dvd screen for the prior two and the xbox game said please insert game into xbox. I try it again in iprep and it gives me unknown flash chip type error. I have tried reflashing nothing is working please help.

Re: lite-on shows dvd screen after flash Please Help!

Posted: Thu Jul 30, 2009 10:56 am
by CoFree
will it play a orig 360 game.
if not do you have the consoles files with a good key.
if so you need to rebuild your lite-on hack firmware and flash it in

Re: lite-on shows dvd screen after flash Please Help!

Posted: Thu Jul 30, 2009 11:07 am
by gatorlee
Why when it pulls the key originally and repeatedly it gives the wrong key?

Re: lite-on shows dvd screen after flash Please Help!

Posted: Thu Jul 30, 2009 11:13 am
by CoFree
im not sure why it would pull a good key then give you the wrong key when it makes the hacked firmware.

you have to flash the good key (and other file being a lite-on)
in that console or it will never work.

you can make the hacked lite-on firmware with jungle flasher and flash it in
or after making the firmware you can flash it in with iprep

do you have the dummy.bin with a good key in it. :?:

Re: lite-on shows dvd screen after flash Please Help!

Posted: Thu Jul 30, 2009 3:51 pm
by gatorlee
Im not sure i create the cfw in jungleflasher and when i load into jf it shows the key that i extracted at the beginning. I tried in iprep but it says unknown flash chip when i put the cfw in the 1234567 12345 mock file. Same with dos flash.