Robin Hoods Playground

hey guys my hit 59 bricked on me last night but today i got a new pcb and when i connect it all up it still wont eject or anything. thinking this 1 is dead to. turns out my mate has a spare samsung drive i can have. could someone please help me on how to inject the 59 key into the new drive. ive seen a few tutorials on this but im unsure what to do and dont wanna brick my drive again lol.

Anyways i have a ck3 pro and via chipset also i have jungleflasher 1.65b and the firmware toolbox. whats the best to use for doing the spoof thing and how will i do this?? if any1 can help me out on this it would be great

Have a look over this mate, that should do the trick

Tutorial for spoofing a Samsung drive into a HItachi console
viewtopic.php?f=197&t=881" onclick="window.open(this.href);return false;


EDIT = commando
Thinking tho if its a new board for the hit drive may be the flash chip has no data thats why its not opening, im not the best at hit drives but thats what happens when the other drives dont have any information on. Try and flash the hit information that you dumped from the other drive and see what happens

commando_lee wrote:Have a look over this mate, that should do the trick

Tutorial for spoofing a Samsung drive into a HItachi console
viewtopic.php?f=197&t=881" onclick="window.open(this.href);return false;


EDIT = commando
Thinking tho if its a new board for the hit drive may be the flash chip has no data thats why its not opening, im not the best at hit drives but thats what happens when the other drives dont have any information on. Try and flash the hit information that you dumped from the other drive and see what happens

the drive isnt showing up in jungle though?!?! thats where im stuck at. how would i get it to flash mate??

do you have the key from the drive before you bricked it?

commando_lee wrote:do you have the key from the drive before you bricked it?

I sure do mate. made a million copies of it too lol

well to flash the samsung, you will need the ix hacked firmware for the samsung either 1.51 or 1.6.
i can guide you through Iprep if you want! Not a big big fan of JF

Good thing you made copies of the key

If you need JF help, I can guide you through it. I use JF as my main flashing program

the firmware is created, just ready to do the flash the sammy is brand new does he have to click sammy unlock??

I have not read through this whole thread, but if the samsung is stock, yes sammy unlock. Also, drive should be half open.

no via card installed, thats why its not finding the drive, taking him down iprep route


cheers mate