Benq flashing, need help windows 7
Posted: Sun Aug 30, 2009 1:56 pm
Im sorry if it may be hard to read im just trying to give the most info i can
Ive reached dead ends with both Jungle Flasher and Iprep
Jungle flasher 0.1.60 beta i get stuck on the mtk 32 flash tab, it comes up with an error everytime i press the benq unlock button, and i cannot find away around it
Ive seen guides and ive noticed that the drive properties are differnt then in the vid
they say:
Vendor:PLDS
Name:DG-16D2S
F/W Rev: 7485
Reserved: 0CA0A1D608CG8248090E
when in the vid it doesnt include the F/W rev and the reserved number
also before that when PortIo32 needed to be installed the application that launches the cmd window says "windows vista error please install manually" comes up everytime even though i did install manually and it shows up in device manager
after i got stuck i gave up i switched to iprep
im using iprep v008.8 currently ive already tryed 10.1,9,008.9.007.3 beta but all failed mostly beacause of the "no valid firmware error" 008.8 was the only one the firmware loaded after i downloaded another ixdef.xml and copyed it in.
after i boot from the thumb drive i put "dben *my serial* *my serial*" push enter and then any key on the next screen it scans my drives and detects it but it says mtk fail would you like to resend y/n (not actual text) and press y like it said at the top, it flashes 0x51 and 0xD1 (dont quite remember exactly what it was) turn it off then back on like it said to do then get stuck on 0xd2 or (dont remember) then i press esc to abort, and it tells me to choose the port which was 5 i press enter then it gives me a paragraph of text that basically says benofw.bin not found error and just stops there.
so i rebooted and tryed skipping to flashing where its basically the same thing.
---------------------------------------------------------------------------------------------------------------------------------------
Ive watch a ton of videos and read a handful of guides but nothing seems to work for me
my guess is that it has something to do with windows 7 but i have no idea
my build of window 7 is 6519 i think i dont remember and its a 32 bit machine
im using a VIA VT6421a chipset
Please help im completely lost and a total noob at this so any help would be appreciated
Ive reached dead ends with both Jungle Flasher and Iprep
Jungle flasher 0.1.60 beta i get stuck on the mtk 32 flash tab, it comes up with an error everytime i press the benq unlock button, and i cannot find away around it
Ive seen guides and ive noticed that the drive properties are differnt then in the vid
they say:
Vendor:PLDS
Name:DG-16D2S
F/W Rev: 7485
Reserved: 0CA0A1D608CG8248090E
when in the vid it doesnt include the F/W rev and the reserved number
also before that when PortIo32 needed to be installed the application that launches the cmd window says "windows vista error please install manually" comes up everytime even though i did install manually and it shows up in device manager
after i got stuck i gave up i switched to iprep
im using iprep v008.8 currently ive already tryed 10.1,9,008.9.007.3 beta but all failed mostly beacause of the "no valid firmware error" 008.8 was the only one the firmware loaded after i downloaded another ixdef.xml and copyed it in.
after i boot from the thumb drive i put "dben *my serial* *my serial*" push enter and then any key on the next screen it scans my drives and detects it but it says mtk fail would you like to resend y/n (not actual text) and press y like it said at the top, it flashes 0x51 and 0xD1 (dont quite remember exactly what it was) turn it off then back on like it said to do then get stuck on 0xd2 or (dont remember) then i press esc to abort, and it tells me to choose the port which was 5 i press enter then it gives me a paragraph of text that basically says benofw.bin not found error and just stops there.
so i rebooted and tryed skipping to flashing where its basically the same thing.
---------------------------------------------------------------------------------------------------------------------------------------
Ive watch a ton of videos and read a handful of guides but nothing seems to work for me
my guess is that it has something to do with windows 7 but i have no idea
my build of window 7 is 6519 i think i dont remember and its a 32 bit machine
im using a VIA VT6421a chipset
Please help im completely lost and a total noob at this so any help would be appreciated
i couldn't find any wires though