Page 1 of 1

Lite On Unknown flag chip message

Posted: Sat Sep 19, 2009 12:09 pm
by bittersuit_98
Hi everyone,
I was flashing a lite-on the old version with iprep 8.8. Dump went OK, valid key and all that. Then I typed the flit command. Then it erased the original fw nut when i hit "W" for the writing I got the unknown flag chip message and couldn't flash the hacked the fw. Obviously the dvd is bricked now. The weird thing is that I had a spare lite on (identical to the other one) so I decided the flash in the hacked fw and it worked flawlessly. The console is working with the spare drive just fine. Any ideas as to what could be wrong with the other lite-on drive? Any solutions/suggestions?
thanx everyone.

Re: Lite On Unknown flag chip message

Posted: Sat Sep 19, 2009 12:21 pm
by Shootsteel
bittersuit_98 wrote:Obviously the dvd is bricked now.
You can only really half brick them....use the L-o-L recovery in dos and your drive should be just fine.

You can find the info you need in the TUT section

Re: Lite On Unknown flag chip message

Posted: Sat Sep 19, 2009 1:32 pm
by djshauny1
Do what shootsteel said mate

Re: Lite On Unknown flag chip message

Posted: Sat Sep 19, 2009 5:40 pm
by bittersuit_98
thanx guys. I will.
Do you guys know what causes the flag chip error message?

Re: Lite On Unknown flag chip message

Posted: Sun Sep 20, 2009 10:09 pm
by djshauny1
bittersuit_98 wrote:thanx guys. I will.
Do you guys know what causes the flag chip error message?
I only had that when using a non compatible sata card
upgraded to a via 6421 and it solved my problem