Robin Hoods Playground

Hello Guys,

I was just flashing my 6th Lite-on today but it seems it didnt went well.
I extracted the key,Identify, Inquiry and the dummy files. Then i said load firmware and i saved the Lite_CFW.bin file.
Then i erased the drive after that i was writing to the drive and my computer freezes. so the writing failed after that i used dosflash to erase it first and then writed the Lite_CFW.bin all looked good.
But when i put the xbox together and turn it on it only plays dvd, if i put in an xbox 360 game it comes with an error like put this game in an xbox 360.
Maybe the Lite_cfw.bin file isnt good? (how can i rewrite this? i tried to do this in jungleflash with reloading the dummy file and then again saved the Lite_CFW.bin file and then with dosflash writed it to the drive but still the same issue)

Is it allowed to place my key here so you guys can take a look at it if the key is good?
Is it maybe possible i had the probe on the R709 instead of the R707? or should jungleflasher come with an error then?

Very strange i tried usting Ixtreme 1.51 instead of 1.6 and with version 1.51 it works. So problem solved
Thnx

No if you put it in the R709 it wouldn't have worked.

Try this tut and let us know how it went:

http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;

Strange one as you've done 5 others. Normally If its working fine with the 1.51 but you're having problems with the 1.6 then you might have 1.6 beta release which was uploaded by mistake but it was easily solved by using the 1.6 repack one. Might be worthwhile redownloading the ixtreme for future use though.

Well i used the Repack on the other 5 xboxes a few minutes before this one i flashed one with 1.6 but this one didn't work with 1.6 so i tried 1.51 and that worked very strange.

Might be corrupted. Redownload the bugger and try again or see if you have the same problem with another drive.