Robin Hoods Playground

hi am am very new to this i really need some help with flashing 360 can some 1 plz tell me what i need start to finish as in softwear and tht plz ...... dave

ok man
i see you made it to the board
good job
now we have to start at the beginning

you posted in the "whats needed" thread.
this is not the right spot
its all good ill move it
but
look over the board good and you will see that most things have its on place.

as far as flashing your 360 dvd drive
this will be a long road
and not something done in a few hours

if you have a good understanding of pc it will still take some time and if you dont then it will take longer
first you need to get you 360 open and find out what dvd drive you have in the console.
this video will help with that.
http://www.robinhoodsplayground.com/for ... =196&t=297" onclick="window.open(this.href);return false;

just click that link and it will take you to the video

ok i done tht what now m8

rite i have got to getting the drive out i got jungle flasher but will not load wen i install portio32 so then i used xtracter reader to get key tht worked i am stuck from there i have iprep 10.7 thats were i am i used ur vids on utube but all lost now

what drive is in 360?
what operating system is pc?
is it 32 or 64bit?
onboard sata or not?
all this info will help us assist you

its a philips & liteon model dg-16d2s ...fw 74850c i have vista 64 bit on 1 hard drive and xp 32 bit on a other hard drive and onbrond sata m8 .... dave

well then
i would say use the 32xp
all the apps are set to work with that one
most will work with 64but
but
your first time you dont need any headaches

being a lite-on 74oo drives
its the worst imo
but
there are two ways to go
you can use iprep v10.7 or jungle flasher v1.66
if you try iprep you will neeed a via6421 a or l chipset on your sata
most people get this card
http://tekgems.com/Products/la-pci22-vt6421a.htm" onclick="window.open(this.href);return false;

or
you can use jungle and try your onbo sata
here is a video on using jungle flasher
he talks about about a via card but you dont need to mess with that
just get your portio driver install and jungle flasher should be fine

here is the video
http://www.robinhoodsplayground.com/for ... 195&t=7783" onclick="window.open(this.href);return false;

rite i installed jungle flasher 1.66 and in stalled portio and click on jungle flasher and it frozed on me it was working befor portio no it aint working ...... dave

hmmm
uninstall portio then
that may be just for a via card

i use iprep

rite b4 it freziz its says no via ports found ? cud tht be the prob if so how do i sort it

are you 100% sure you have onbo sata ports

there on my mother b so must hav

Untick the "via ports only" in the dvd key 32 blade then try again.

sorry but were tht cant see it any were

This tab:



At the top theres a box which says " Via ports Only" untick it