Robin Hoods Playground

Ok I still have original firmware so all is good there.
When I did my flash with JF 1.6b all was good till my screen froze. Now Im unable to access my lite-on drive I have tried iprep, dos flash, jf, even this xbox360 mod disc. no luck at all.
What else can I try?

Thanks

Ok so the drive will not eject etc?
What sata card are u using??
If u have all the files u pulled from the drive i will be able to help u unlock the drive
Check your pm i sent you

viewtopic.php?f=197&t=7041" onclick="window.open(this.href);return false;

thats a text file but u will need to use the correct firmware for the 83850c drive the commands are the same

or this method

viewtopic.php?f=195&t=3226" onclick="window.open(this.href);return false;

Hi,
Would the commands be the same with iprep 10.7 as im having trouble finding iprep 9 on the web.

Thanks jonney

jonneyboimc wrote:Hi,
Would the commands be the same with iprep 10.7 as im having trouble finding iprep 9 on the web.

Thanks jonney

Iprep 9 is in the download section but you will need an up to date ixdef.

but yeah the commands are the same for v11.6 where the guide says flit 1234567 12345 you can use this command L83 1234567 12345 w

HI,
Thanks for the reply, im so stupid sometime lol, i ment 11.6 not 10.7.. thanks anyway ill give it ago 2moro when i get my CK3.

Sam = Samsung ms25 or ms28
Ben = Benq Vad 6038
L74 = Lite-on 7xxxxxxx
L83 = Lite-on 8xxxxxxx

JUst read commads

iprep 9 = "dsam" iprep 11.6 = "sam 1234567 12345 r"
iprep 9 = "dben" iprep 11.6 = "ben 1234567 123457 r"
iprep 9 = "dlit" iprep 11.6 = "l74 1234567 12345 r" if 7xxxx "l83 1234567 12345 r" if 8xxx

JUst write commads

iprep 9 = "fsam 1234567 12345" iprep 11.6 = "sam 1234567 12345 w"
iprep 9 = "fben 1234567 12345" iprep 11.6 = "ben 1234567 12345 w"
iprep 9 = "flit 1234567 12345" iprep 11.6 = "l74 1234567 12345 w"
if 8xxx drive iprep 11.6 = "l83 1234567 12345 w"