Page 1 of 1
iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Tue Oct 13, 2009 11:50 pm
by jrawl004
Having a huge problem and need you help. I followed you tut to the T. Benq VAD6038. I got to the end and iPrep stopped when it started to write the custom firmware. Now when I try to reflash I get DataSum: 0000
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
ERROR
Wisely Loves Lan String Missing.
What do I need to do in order to flash it to the CFW or back to the OFW. I have the backup still with the key.
v/r
James
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Wed Oct 14, 2009 12:05 am
by djshauny1
Does the drive still respond
Like open close etc?
DJ
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Wed Oct 14, 2009 12:06 am
by jrawl004
no it wont open or close
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Wed Oct 14, 2009 12:08 am
by djshauny1
check your pm box in a min
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Wed Oct 14, 2009 12:11 am
by jrawl004
ok, thanks man
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Wed Oct 14, 2009 1:44 am
by jrawl004
MAN I TELL YOUI THAT DJ KNOWS HIS STUFF. We fixed it (he fixed it). AWSOME
THANKS, SUMMIT
DJ
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Wed Oct 14, 2009 1:56 am
by djshauny1
Ha
Glad we got it going again man
Any other problems just ask
DJ
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Sun Nov 08, 2009 12:44 pm
by ionaustin
hey i am having the exact same problem i have my orginal firmware and im trying to upgrade to 1.6 and i get that same error
i cant use jungleflasher either because i am running windows vista x64
Drive=Benq
Firmware on drive=None?
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Sun Nov 08, 2009 10:44 pm
by adultswiivi
EDIT***
i got it NVM
needed IPREP V9
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Mon Nov 09, 2009 12:11 am
by rkd2398
djshauny1 wrote:check your pm box in a min
jrawl004 wrote:MAN I TELL YOUI THAT DJ KNOWS HIS STUFF. We fixed it (he fixed it). AWSOME
THANKS, SUMMIT
DJ
I am glad you got the drive sorted, but this won't help anyone else who has this problem. These types of problems should be resolved on the thread so that it gives people a chance to search the forum and find a resolution with out having to pm someone. That's why RHPG exists, to help anyone and everyone.
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Fri Nov 20, 2009 10:35 pm
by kingrl2
I truly hope djshauny or jrawl004 are still hanging around because I have exactly the same problem. My Benq hung before erasing, but now I get the "wisely loves lan string missing" error each time I try to flash using iPrep 10.7 and iExtreme 1.61. The drive does not respond to eject.
Any help would be greatly appreciated.
Re: iPrep 10.7 failed to flash on BenQ VAD6038
Posted: Sat Nov 21, 2009 12:31 am
by kingrl2
Nevermind, I fixed it. In my case, I had a good backup of the orig firmware, so I read in another post that you could run "C:\ben XXXXXXX XXXXX w" and it would skip trying to backup the firmware and go straight into erasing the drive and then flashing it with the new firmware. Everything went fine after that.