Page 1 of 1
how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 1:17 am
by grandview
just got back my xbox"s from microsoft...the drive that came in it was the hit 0047dj..never didnt one...need help please
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 1:23 am
by HaGGardSmurf
Same as all hitachi's (except the 79)
Find your drive, open tray, send mode b, read the drive, save OFW, write your ixtreme...
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 1:31 am
by grandview
im getting this
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 2:00 pm
by grandview
anyone out there...
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 2:10 pm
by fithwill
try to refresh
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 2:18 pm
by fithwill
if that does not work try using mode select to dump
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 2:30 pm
by grandview
k..thx
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 11:28 pm
by intheshade
You may need to scan for hardware changes in you device manager
then hit refresh in jungleflasher.
Re: how to flash a hit 47? need help?
Posted: Wed Oct 14, 2009 11:44 pm
by HAZ3
this is all you need honestly. I always refer this guide to guys whom are in the same situation i was once before. I'm just here to help. good luck & make sure you follow the guide thoroughly. NOTE: this tutorial is for firmware toolbox, not jf
viewtopic.php?f=63&t=5882
Re: how to flash a hit 47? need help?
Posted: Sat Oct 17, 2009 4:07 am
by grandview
thx...all i had to do was scan for hardware changes in my device manager