Robin Hoods Playground

Posted: **Mon Oct 19, 2009 3:39 pm**

ikari released the first version of 'freeBOOT' for xenon (v1) and falcon (v3) consoles with JTAG/SMC-Hack.

This 'rebooter' will allow you to 'reboot' the 360 into an MS kernel after starting it with the JTAG Hack ... in this case (freeBOOT v0.01) it should reboot the console into MS kernel 8498 (but I assume 8507 will be possible too, and it's probably also the first step into rebooting into patched/modified MS kernels).
The readme says it requires the Cygnos360 v2 chip atm, I'm assuming they need it to automatically reset the SMC back to original.

Booting your 360 into 849x+ and keeping the JTAG Hack working was impossible until now, because updating to 849x+ via the MS update procedures burned a CB-fuse which made it impossible to still perform the JTAG Hack. If you already updated your console to 849x+ via normal update methods there is still no solution for you, but if you have a JTAG 'hackable' console (kernel 7371 or lower on NAND) freeBOOT should allow you to 're boot' it into 8498 via the JTAG Hack (using 'virtual fuses').

From readme/nfo:

* Introduction
Finally, here it is - freeBOOT, a rebooter for the Microsoft Xbox 360. This version of freeBOOT allows you to reboot into kernel 2.0.8498 on a Xenon or Falcon console, which can be exploited by the JTAG hack. Support for Zephyr, Opus, and Jasper consoles will follow shortly.
As freeBOOT needs a second flash memory to store kernel 2.0.8498 and associated data, a Cygnos360 is required at the moment.
Read through the following instructions carefully. Building your own images is yet a complicated task involving many steps. Future versions of freeBOOT will be easier to build.

Power on your Xbox 360. If everything went correctly, you should see the blue LED light up a few seconds later, followed by the usual boot animation. If you power on your Xbox 360 with the DVD tray eject button, XeLL will be loaded instead.

* Credits
Writing freeBOOT would not have been possible without the great work done by many hackers. Kudoz to arnezami, Redline99, Robinsod, SeventhSon, Tiros, tmbinc, xorloser, and anyone else I may have missed.

* What's next
Features planned for the next release(s):
-support for all consoles
-update to the latest kernel

source

So hands up whos gonna try it if theyve got the chip??

Posted: **Mon Oct 19, 2009 5:00 pm**

I have a Jasper console.

I'll wait until it is available for jaspers. I already have the Cygnos360 V2

Posted: **Mon Oct 19, 2009 6:28 pm**

I'll have to sort out which box I want to use for the Jtag, then buy the cygnos v2

Posted: **Tue Oct 20, 2009 6:44 pm**

Here's a confirmation video:

I was asked to come help, so if you guys need pointers on how to get this running, go ahead and post.

Posted: **Tue Oct 20, 2009 6:50 pm**

ok guys
now that we have a little backup on this j-tag stuff
The only thing i have ever j-taged is a dish box or two

im going to start a area just for j-tag post and question.

staff
guys lets keep it clean.only jtag related stuff.

ill get my Cygnos360 v2 on order as soon as possible

jester
let me be the first to say welcome to the site
have fun

Posted: **Sun Oct 25, 2009 10:47 am**

would this in anyway shape or form allow us to .map mod by allowing unsigned code etc or even extracting the RSA from the 360 to enable .map modding (from a modders point of view)

Robin Hoods Playground

freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack

freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack

Re: freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack

Re: freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack

Re: freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack

Re: freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack

Re: freeBOOT v0.01 - Xbox 360 8498 Rebooter for JTAG Hack