Robin Hoods Playground

hi all been given a xbox with GDR 3120L ver 0047dj it as been flashed and working how can i tell which f/w is in the drive now and wud i be able to update the drive and i dont have the original f/w thanks for any info on this btw can i put a new drive in my xbox.........

on the older hit driver you have to do a restore.then you can flash to a newer firmware.
if you look iver this guide it goes into it.
http://www.robinhoodsplayground.com/for ... =110&t=322
after the flash.there will be a was file,now file,key file this will be you important information to keep safe.
you can spoff a different dvd drive in it but if it working dont do that till you have to.

thanks alot

that was a great video m8 but wot does older hit driver mean soz for being a pain

the v78 and the v79 hit are the " new " hit
all the other ones are the older ones

hi im still trying to do a restore on my drive load the slax disk get to the part login but all i get is my xbox drive flashing red im using this pc card VIA VT6421A Serial ATA do i have to get some thing else like a conectivty kit or some thing
im trying to get me drive to work in windows thanks again any info on this.................

I've never used the slax cd to get it into mode b so I can't comment on it, but the connectivity kit comes with a mode b switch on it that really simplifies the process. You would no longer have to mess with the slax cd. I use one with my hit and I personally think that the hit is the easiest drive to flash.

thanks m8 were wud i get one of the kits from wot wud i need thanks

This is where I get my my stuff from. Check out this link.
http://www.consolesource.com/ecomm/cata ... c-242.html

You will need some way to power this kit up. I use on old power supply from a computer, but I have used the power from an xbox1 before. You can't power it up from your flashing computer because you have to be able to reboot your computer without turning off the drive you are flashing.

You also may want to look at this tutorial.
viewtopic.php?f=110&t=322
Cofree is using a usb to sata adapter (the blue item in the video) in this one, but you can just use you sata card.

thanks jman31 will this do the job in uk http://www.kanection.co.uk/product.php/876/139/x360-usb

Yes that is actually the best way to do it imo. The usb360 is not necessary if you have a sata port, but that's what I use and it really simplifies the process.

you will still need some way to power the connectivity kit though. constant power supply of some sort.

Jman 31 wrote:you will still need some way to power the connectivity kit though. constant power supply of some sort.

as jman 31 says.. you need a power supply.
I built one from a external hard drive caddy.. using the built in mini power supply

but you can use something like this : http://www.amazon.co.uk/SATA-3-5-2-5-CA ... 10&sr=1-12

hi again i think i have now sorted it i did a restore and flashed the drive i now have was file and key file now file 47-16-8x file wot do i do with these
do i save them just and wot use will ther be thanks again for all help you have all done