Robin Hoods Playground

Hi I followed shootsteels tutorial and during the flash of my lite-on drive Jungle Flasher froze and I had to force close it. From what I have read you can flash the original firmware back onto the drive but I can't figure out were JF saved the original firmware files. So if I could get some help it would be greatly appreciated.

Tutorial I used = http://www.robinhoodsplayground.com/for ... 195&t=7783" onclick="window.open(this.href);return false;

Look in Documents. Then after you find it, go here viewtopic.php?f=63&t=4351" onclick="window.open(this.href);return false; and do all those steps first. After that you should be able to erase and write your liteon with no problem. Just remember where you put those files and don't be in such a hurry to click through. Good luck

Well the thing is, there is no original FW for the lite-on once you have erased the drive, there is no way to return it to stock. Currently you will need to do the work around, then try to resurrect the drive in jungle flasher, or use cofree's method with dos flash. Either way you will need to flash ixtreme.