Robin Hoods Playground

yes i am trying to flash my samsung with jungleflasher i follow the tut but when i put in a back up it says open tray this is from jungleflasher maybe someone kno if it flashed okay





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.66 Beta

Session Started Sat Nov 07 20:03:02 2009



This is a 32 bit process running on a 32 bit CPU

PortIO is installed and running.

Found 4 I/O Ports.

Found 1 Com Ports.

Found 3 windows drives A: C: E:

Found 0 CD/DVD drives





Sending Sammy_Un_Lock to Drive on port 0xDCE0

Stage 1, Complete!

Stage 2, Complete!

Stage 3, Complete!

Done!

Sending Vendor Intro

Vendor Intro Failed

Sending Vendor Intro to port 0xDCE0

Status 0xD1

Re-sending Vendor Intro:

....

Parallel flash found with Status 0x70



Sending Device ID request to port 0xDCE0

Manufacturer ID: 0xBF

Device ID: 0xB6

Flash Name: SST(SST39SF020)

Flash Size: 262144 bytes



Getting Status from port 0xDCE0

Parallel flash found with Status 0x70



Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ...........x.....

Reading Bank 3: ................



Loading MTK_Flash source file

Inquiry string found

Identify string found

DVD key found @ 0x4116 key is 28F530D04F7258F26596C4A24A5716FA

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: iXTREME1.6-12x-FINAL-TS-H943A



Key database updated

Loading target file C:\Documents and Settings\andi\Desktop\Samsung ix1.6\ix16-samsung.bin

Target File MD5 hash is: 23f5a368839dfc10dabb8231ba64567a

Genuine Samsung iXtreme 1.6

Inquiry string found

Identify string found

DVD key found @ 0x40EC key is 77777777777777777777777777777777

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: iXTREME1.6-12x-FINAL-TS-H943A



Spoofing Target

DVD Key copied to target

Inquiry strings identical

Identify strings identical



Getting Status from port 0xDCE0

Parallel flash found with Status 0x70

Writing target buffer to flash

Erasing Bank 0: ................

Writing Bank 0: ................

Erasing Bank 1: ................

Writing Bank 1: ................

Erasing Bank 2: ................

Writing Bank 2: ................

Erasing Bank 3: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0xDCE0

andipad wrote:Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ...........x.....

Reading Bank 3: ................

why is there a "x" in bank 2, ive never seen this before.

dont kno i have tried to flash this already like 5 times the first time i did it did not give that x but when i would put in a backup it would say open tray

Ive never seen that before i cant help you, maybe someone else can, sorry man :/

Its flashed fine, at least the log looks good.

The x just means it failed to read that sector, but if you notice there is still 16 dots, so it failed, retried and read it fine.

Does your drive play originals, and dvd's if so, then its your media thats bad, or your dvd burner.

it plays originals good when i put the backup it says open tray and it cant be my dvd burner cause it writes dl dvds and i used to have a xbox360 with a liteon drive flashed and it woul read it so did it flash okay

What is likely going on here is your MS28 has a weak laser. Original games and DVD's are pressed with million dollar equipment, and we are burning backups with a 40 dollar drive, and a 2 dollar DVD, so the quality is much lower than original games, and original dvd's so the drive has a harder time reading it.

To me that log looks fine, and the write was verified ok, so all seems well... Try replacing your laser in that ms28 and you should be all good to go...

what i dont get it that it reads some of my backups but not all of them

is replacing the laser easy to do and i would have to get a laser that is for the samsung ms28

Replacing the laser is as easy as opening the drive, un plugging some ribbon cables, and unscrewing the rail, then removing the laser.

http://s140.photobucket.com/albums/r28/ ... ddrive.flv" onclick="window.open(this.href);return false;

There's a link to a video of me replacing the laser in my samsung/hitachi

Sammy's and Hitachi's share laser's, so you can buy either laser.

PS, if I were you, id just buy a whole new drive. You can buy the 10 dollar laser, and put it in an old worn out drive, or pay 20-30 and buy a completely brand new drive.

okay but if i buy a new drive will my xbox360 accept it like do i have to do anything to the brand new drive

andipad wrote:okay but if i buy a new drive will my xbox360 accept it like do i have to do anything to the brand new drive

You'll just have to spoof the new drive to the old drive. Should be able to find a tutorial very quickly here

yes but i am going to buy the same drive that is already came with my 360 i still have to spoof it which is a samsung