Robin Hoods Playground

just a quick question....

yesterday I fried my dvd... I have the key.bin file... so wer'e all fine..

cyantific sayed in this post:
http://robinhoodsplayground.com/forum/v ... 627#p51550" onclick="window.open(this.href);return false;

my question is; do i have to flash the drive to be able to "spoof"
or is there a simple way of inserting the key.bin file?

decided to buy a:
Lite-On & Phillips DVD-Rom for XBOX 360
67 $ "from a "local" Norwegian site"
http://www.modnet.no/product_info.php?products_id=3595" onclick="window.open(this.href);return false;

to spoof a drive firmware it will have to be flashed in

CoFree wrote:to spoof a drive firmware it will have to be flashed in

flash as flash to a firmware as "1.66b" or flash as I have to flash just the key?!

just another Q.

what does this mean:

Jungle Flasher v1.66b on lite-on v8300 360 drive
old there is a new guide for the 8000 with jungle
Jungle Flasher v1.66b on lite-on v7400 360 drive

what does the v.8300, v8000 and v7400 ... version for what?

samerali2 wrote:what does the v.8300, v8000 and v7400 ... version for what?

This refers to the drives version which can be found on the top of the drive.....read your drive carefully and you will find it on the lower left hand corner There is the 7000 series, 8000 series, and now the 9000 series...thats what you got to know. Need more let us know

Shootsteel wrote:

samerali2 wrote:what does the v.8300, v8000 and v7400 ... version for what?

This refers to the drives version which can be found on the top of the drive.....read your drive carefully and you will find it on the lower left hand corner There is the 7000 series, 8000 series, and now the 9000 series...thats what you got to know. Need more let us know

thanks a lot for the assist
mine will be the 7400 seri. =)

first power drive with tray half open
1 In JF make sure your drive is found
2 load your firmware you got from the old drive
3 load lite on firmware and click spoof to target
4 erase drive ,hit ok twice then power cycle the drive.
5 write target firmware
after done click outro

docwarbucks wrote:first power drive with tray half open
1 In JF make sure your drive is found
2 load your firmware you got from the old drive
3 load lite on firmware and click spoof to target
4 erase drive ,hit ok twice then power cycle the drive.
5 write target firmware
after done click outro

1. found.
2. how to load, what botton to press !!!
3. what botton :/ ...... and what do I get/happen when I press wpoof!
4. hit ok twice... seen that in the tut. but what do u mean cycle the drive? off then on the probe kit?
5. hmmm... is it just the button "write" ?? "in MTK Flash 32"
6. ... outro / ata reset... must be!!

Edit*
I dont need to wary about about console serial nr. or something like that now do I !!!

Edit*

is this what you mean?

i think what docwarbucks is talking about is in 'mtkflash'. you need to 'spoof source to target to target'. the key in target is the repack key. you need to make sure the key in 'source' and target are the same. otherwise you will not be putting your key that matches the motherboard from which the drive is married too. if you write the '55aa55aa55aa55aa55aa55aa' key to this drive it will not play a backup.