I'm trying to get my old Toshiba Samsung xbox drive connected to my computer so I can rip games.
I got a connectivity kit and got everything hooked up and got to the stage of flashing the drive with 0800 firmware. When I tried to load it with iPrep 10.7, it says not valid firmware.
I have tried updating the defination files, but still no avail.
Is this the correct way to flash it or do I need to do something different? I have flashed my drive a few times now but never tried to get 0800 firmware on it.
Ripping game from Tosh-Samg drive
Re: Ripping game from Tosh-Samg drive
What you need to do is open up jungle flasher and put the sammy in vendor mode then flash the drive with 0800 firmware, then everything should be good to go.....
- commando_lee
- Ally of Robinhood
- Posts: 1821
- Joined: Sun Apr 26, 2009 12:50 pm
- Location: Up high in the tree looking out for the Sheriff of Nottingham
Re: Ripping game from Tosh-Samg drive
Follow this tutorial
http://robinhoodsplayground.com/forum/v ... 197&t=7068" onclick="window.open(this.href);return false;
if your using 10.7 just change the iprep command from fsam 1234567 12345
to
sam 1234567 12345 w
http://robinhoodsplayground.com/forum/v ... 197&t=7068" onclick="window.open(this.href);return false;
if your using 10.7 just change the iprep command from fsam 1234567 12345
to
sam 1234567 12345 w
................................................................RobinHoods Very Own
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
Re: Ripping game from Tosh-Samg drive
Sweeeeeeeet! Will try that tonite.
Thanks guys.
Thanks guys.
Re: Ripping game from Tosh-Samg drive
Got the drive flashed ok and it's being recognised in windows 7. I put a movie dvd in to see to see if it would play but it blue screens the computer. Is it possible to use the xbox drive this way?
- commando_lee
- Ally of Robinhood
- Posts: 1821
- Joined: Sun Apr 26, 2009 12:50 pm
- Location: Up high in the tree looking out for the Sheriff of Nottingham
Re: Ripping game from Tosh-Samg drive
i have played movies with a benq drive in windows as it acts like a normal drive.
Not sure on the error with win7
Not sure on the error with win7
................................................................RobinHoods Very Own
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
.......................................
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
Re: Ripping game from Tosh-Samg drive
Its windows 7 64 bit. Reckon that will make a difference?
So the drive should act like a normal DVD ROM drive? I'll try it in another computer.
Should it be connected thru the VIA SATA card or thru the motherboard sata?
Thanks for the quick reply.
So the drive should act like a normal DVD ROM drive? I'll try it in another computer.
Should it be connected thru the VIA SATA card or thru the motherboard sata?
Thanks for the quick reply.
Re: Ripping game from Tosh-Samg drive
Brought the kit into work and it loads fine. It plays a movie DVD no probs.
What is the mode button for? I think I might have had it in the wrong mode when I was trying it at home...
What is the mode button for? I think I might have had it in the wrong mode when I was trying it at home...