Help Please

[Svengali86]

Hey guys im new to this site, been advised to come here.

I'm having a little problem with flashing my xbox 360.

I have successfully flashed one before (a ben-q), all working all good.

Now i have to flash another.

Ben-q drive new arcade 360 with HDMI.

I went through all the procedures following the guide correctly, when i test the xbox i realised i left a disk in the drive (shit) sometimes it wont open. so i went through the flashing again and now i get no valid drive key error.

I still do have the original firmware, and the drive key written down.

How do i get the drive back to a state where i can start over again?

Using i prep i re-did my usb stick to boot into dos, now the pc will not boot into dos and run the program. the program is deffo on there. I have used this stick before and managed to get it to boot earlier. now im stuck, its my lil nephews xbox and i dont really wanna shell out 150 quid lol.

Any help will be greatly appriciated.

Thanks

Dan (From Notts )

[CoFree]

man i would get it back to stock first and foremost.
here is a guide to doing a restore.
http://www.robinhoodsplayground.com/for ... =110&t=196" onclick="window.open(this.href);return false;

now your computer not booting on the flash is something you will need to get worked out.sorry to say.
that is the first thing you have to get working.
let us know if you need anything more.

[Svengali86]

I found my long lost usb stick from years ago lol, used that, and now xbox works perfectly.

Thanks for your advice and time.


Dan

[Jman 31]

You may want to try reformatting the other one. That may take care of it, but good job on getting it going.

[CoFree]

i would keep that flash in a safe place
good job man