Cant flash Toshiba Samsung at all

[stumpx2]

Well i messed up the first time i did it but saved my sam-ofw .bin. i tried the tut. on here about making the folder called you serial number and placing the original firmware in it but every time i try i get the same message "Port:14e0 Master/Slave a0. I get this booting from a usb using both iprep and xtreme boot maker to get this message. I know my key is good b/c i checked it in firmware toolbox. Im using a via sata VT6421 and getting no where since i messed up the first time around. Any help would be appreciated.

[parminder]

hmmm how did you manage to get the firmware of the drive in the first place, did you get any errors when you check it in toolbox is the key valid with like different sets of numbers. what i would would do is, resit the card in the pci slot, make sure it is fully fitted. then reinstall the drivers which came on the disk with it, i think its 5.60 version, once its successfully installed, use iprep to make a bootable usb, make sure u select right firmware and click on mtk patch box and select your raid controller, also make sure your sata cable is connected to the nearest port which is closer to the motherboard.
follow the guide and do not flash, read the firmware again and see if you get a valid key and hacked firmware again. and report back

[CoFree]

folder called you serial number and placing the original firmware in it

you are talking about 2 folders right.1 the fist 7 of you ser and the 2 the last 5 right.
you need to follow the guide to the letter.

[stumpx2]

yeah im talking about the two folders and my key is valid

[CoFree]

well man do what parminder said.
that is the first thing that needs to happen.
you have to get the computer seeing the 360 dvd drive again.it has to list xtreme pri master.

[stumpx2]

it does list that as one of the options but when i hit 3 i still get "port:14e0 Master/Slave a0"

[CoFree]

man that is the first thing you have to get going.
you need to try different ports on the card ,different pci slots.
different usb flash may help.
you have to get a dump again of that dvd drive
i guess there is a chance that the drive could be bad.
i would try every thing before i was thinking that.

[stumpx2]

Ok i tried both sata ports on my chipset and it still just gives me the same message "port:14e0 Master/Slave a0" ive used both xtreme boot maker and iprep. Can anyone help? i can send them my original firmware

[CoFree]

man
this is not because of your firmware.
as long as you opened in with firmware toolbox v4.6 and the key was different numbers and letters its good.

just use iprep v101.6.2
Most of the time you will use the sata port that in closest to the front of the computer.(inside the computer)
If that port does not work and you have tried everything then try the other sata ports.

ok you said that it will list xtreme pri master
that mean that the computer is seeing the 360 dvd drive.
at that point you are turning the power off.hitting the 3.and counting to 10 (right)
then turn the power back on.

man just start over and look over everything and read over the guides again and make sure you are not doing sometjing in the wrong order.
video flashing the samsung http://www.robinhoodsplayground.com/for ... =110&t=401" onclick="window.open(this.href);return false;
giude to doing a restore on a samsung http://www.robinhoodsplayground.com/for ... =110&t=196" onclick="window.open(this.href);return false;
textbook guide for hacking a 360 http://www.robinhoodsplayground.com/for ... =110&t=196" onclick="window.open(this.href);return false;

where are you at man send me a pm.if you want i could take a look at it for you.if you are on the right side of the pond.

[stumpx2]

thanks alot guys got it working 100%

[parminder]

glad you got it

[CoFree]

well man give it up.
what was the deal.what did you do to get it going.