Samsung ms28

[Smirthswood]

Hello just wanted to no if some 1 on here could tell me a simple quick guide like from when I boot of My usb stick i am using the iprep v008.8 compiled by Klutsh method were it saying type dsam and serial ect but after I have typed dsam and the serial it saying ensure your drive is on which from that part I turn it on and press any key and then it say's 0) 0x01F0 IDE Pri Master ATAPI DVD D DH16D1P FX14
MTK Vendor Intro Failed on port 0X 01F0.
If you choose to resend the command you should turn the drive off and on after you pressed ''Yes'' Do you want to resend the command until the drive responds (Y/N)?


( i have a SAMSUNG ms28 but i don't no if this is anything to do with it) PLEASE if any 1 can help PLEASE thank you

Moved to correct forum by Admin Staff: Sadalius

[CoFree]

look over this video guide
http://www.robinhoodsplayground.com/for ... 110&t=3266" onclick="window.open(this.href);return false;

[lilrevuk]

That drive is your DVD Writer by the looks of it, I'm pretty sure that address is IDE. Ideally that wants to be unplugged before you try again, just makes things simpler with less for iprep to find...

What sata controller are you using?? If you haven't got one, get a VIA (link in my sig)... In regards to the drive you only want to resend the command to the drive on the port that you're using...

[kryptic]

When i use iprep i unplug everything except the xbox drive,i`m sure it recommends this method.