Flashing Lite-on Xbox 360 With Iprep
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
ck3 KIt
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
-
- Board Warrior
- Posts: 300
- Joined: Mon Jan 05, 2009 6:01 am
- Location: England UK..where its very very cold...!!
Re: Flashing Lite-on Xbox 360 With Iprep
looks like you connected the power to the ck3 the wrong way round...youve probably killed the ck3....
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
how should i do it on another way then?
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
can someone plz help beacuse i don't really know what to do ?
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
Re: Flashing Lite-on Xbox 360 With Iprep
How did you connect it to your computer, through a molex connector??
This is what the correct connector looks like:

If you used anything else, thats why the CK3 kit smoked. If thats what you used, then you need to get in touch with the people that you bought it from and tell them about it. Most generally, they will replace it if you explain to them that nothing else was connected to it except for the molex connector. Hopefully you didn't have your lite-on connected up, because there is the possibility of inserting the power cable in upside down and if this is what happened, your reseller won't replace it.
This is what the correct connector looks like:

If you used anything else, thats why the CK3 kit smoked. If thats what you used, then you need to get in touch with the people that you bought it from and tell them about it. Most generally, they will replace it if you explain to them that nothing else was connected to it except for the molex connector. Hopefully you didn't have your lite-on connected up, because there is the possibility of inserting the power cable in upside down and if this is what happened, your reseller won't replace it.
Sadalius
No questions by PM please
No questions by PM please
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
Here is one pic when i had connect it , the cable wound'nt fet upside down. Only just like the photo.?




Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
Re: Flashing Lite-on Xbox 360 With Iprep
That is the right connector. If you didn't have your lite-on connect up, you need to contact the place you bought the CK3 and see about returning it for a new one. It's unusual to hear that something from xecuter performed in that manner, but I guess with electronics, anything can happen. But I would for sure see about getting a replacement.
Sadalius
No questions by PM please
No questions by PM please
Re: Flashing Lite-on Xbox 360 With Iprep
I agree
who did you get it from.
and
let us know how it goes with them.
I've started commenting
to every place i send a order or email to.
"I will be sharing my experience with your company with the member of robinhoodsplayground"
not that i think that will do any thing
but at least they will know the word will be going out good or bad.
who did you get it from.
and
let us know how it goes with them.
I've started commenting
to every place i send a order or email to.
"I will be sharing my experience with your company with the member of robinhoodsplayground"
not that i think that will do any thing
but at least they will know the word will be going out good or bad.
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
Thanks for help . Mate should I instead buy the PRO or Lite again .?
And on the Pro will it inclue a power supply , for as you see it's a bit to short so i to hold it on the hand . in the Cofree's movie he had a long Power supply , if it doesn't inclued Where can i buy it?
And can just make a Short tutorial while connecting the connectivity kit up to the computer?
Thnx for all help !!!
And on the Pro will it inclue a power supply , for as you see it's a bit to short so i to hold it on the hand . in the Cofree's movie he had a long Power supply , if it doesn't inclued Where can i buy it?
And can just make a Short tutorial while connecting the connectivity kit up to the computer?
Thnx for all help !!!
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
I bought it here http://SHOP.01media.com" onclick="window.open(this.href);return false;CoFree wrote:I agree
who did you get it from.
and
let us know how it goes with them.
I've started commenting
to every place i send a order or email to.
"I will be sharing my experience with your company with the member of robinhoodsplayground"
not that i think that will do any thing
but at least they will know the word will be going out good or bad.
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
I have already said to them that ; I have talked to a great ForumSite Called http://www.robinhoodsplayground.com" onclick="window.open(this.href);return false; about this problem and other stuff i wonder.
I 'am trying to keep the WORD UP! And thnx for help again!!






Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
Re: Flashing Lite-on Xbox 360 With Iprep
no it does not come with a power supply
i use a old at power supply that i took from a junk pc that i trashed.
i use a old at power supply that i took from a junk pc that i trashed.
- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
Which do you recommend ? Lite or Pro?
Can you make a quick Tutorial (not video) How to connect it to the computer
Like
1.blabla
2.blabla:D
Can you make a quick Tutorial (not video) How to connect it to the computer
Like
1.blabla
2.blabla:D
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!
Re: Flashing Lite-on Xbox 360 With Iprep
i have a pro
its just a one way plug

its just a one way plug

- Gony
- Merry Men
- Posts: 176
- Joined: Mon Jan 05, 2009 10:54 pm
- Location: in the hood of SWEDEN
- Contact:
Re: Flashing Lite-on Xbox 360 With Iprep
alright it's kind of a noobie question but its the first time i'll do it.
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
This is thnx to RHPG!