my benq 0800 wont be detected on computer
-
xx0warrig0xx
- Board Warrior
- Posts: 254
- Joined: Sat Mar 07, 2009 9:27 pm
my benq 0800 wont be detected on computer
ok i spoofed orginal firmware key into 0800 firware flashed it with dosflash 32 it says successful i reboot computer and turn off on ck33 and windows no detect it what do i do?
.............
Re: my benq 0800 wont be detected on computer
some people have to play with when they power up the 0800 drive.
most of the time if you power it up at the windows loading bar
it will find it.
most of the time if you power it up at the windows loading bar
it will find it.
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
No Questions by PM.
No Questions by PM.
-
xx0warrig0xx
- Board Warrior
- Posts: 254
- Joined: Sat Mar 07, 2009 9:27 pm
Re: my benq 0800 wont be detected on computer
actually i had to re-install/enable Via drivers and disable portIO for the time being
.............
Re: my benq 0800 wont be detected on computer
xx0warrig0xx wrote:actually i had to re-install/enable Via drivers and disable portIO for the time being
Not sure why people don't do this........
Right click "My Computer". Go to "Properties".
Then to "Hardware". Finally "Device Manager".
Right click on anything in the tree and choose "Scan for hardware changes"
Should pop right up like you just plugged in a brand new flash drive.............
