Lite-On Freezing

[fcrsbet]

Trying to unlock Lite-On Drive, i m using the how to Video and everything is working fine but right when i m in dosflash and get to the point of either erasing or writing it just freezes on block 0 ( the first one it tries to do ) anyone had this before ?

did the write this time, and it said Erasing ... OK! Erasing Finnished! then went to Writing Bank 0 ... and just freezes at this point .. any ideas ?

[rkd2398]

Are you using the CK3 and probe or did you solder it? Have you tried Jungle flasher?

[fcrsbet]

first time i did it i used the probe and with Jungleflasher and it frooze there aswell, so then i tried dosflash and it did the same thing.

[Shootsteel]

When using the "l-o-eras.exe xxxx" command what does it return each time?

My edit ....
xxxx = the port your drive is connected to

[fcrsbet]

it was the same as the video for unlocking. something like FF80 then FF72 i then power off hit y then power back on it finds the drive no problem then right when i say write it freezes as Bank 0 each time.

[rkd2398]

What type of computer are you using? I wonder if it could be the sata port causing the problem.

[Shootsteel]

it was the same as the video for unlocking. something like FF80 then FF72 i then power off hit y then power back on it finds the drive no problem then right when i say write it freezes as Bank 0 each time.

if your getting 72 then you should be there...have not seen this before.

[fcrsbet]

i was using the external port on my Via Sata card i believe it was B880 i just moved the cable to the internal port BC00 and it worked no problems.

Hopefully this will help someone else.

[lilrevuk]

Glad you got it...

This applies to any sata you might be trying to flash with.... Always use the primary port