Help with dumping benq file

[daywalker082080]

Hey guys new to forum done all the research on dumping and flashing benq dvd drive....however any and all help is appreciated....get to the part in dos when its time to to put in the command to dumb the drive...and then i hit yes for mtk flash with xbox powered off...then it hangs on 0x73 and doesnt do anything....restarted computer and it hangs at the same place now it has 0x80??? can anyone tell me what im doing wrong...I have installed the pci sata card va6241 and thats what I was using.......HELP HELP

[CoFree]

some say they have to have the power on when they resend mtk
look over this guide
http://www.robinhoodsplayground.com/for ... =110&t=277
this one is if the power on and off is not doing right(ive never had to do it this way)
http://www.robinhoodsplayground.com/for ... =110&t=254

are you using iprep
if its not flashing Di then the computer is not seeing the 360 dvd drive.

[daywalker082080]

wow thanks for the fast reply...yes ive watched your 42 mb video u made it look so easy...yes im using iprep and ive prepared that properly...just trying to figure out if im doing everything correctly why isnt the pc seeing the drive? ive even put the sata pci card in different ports HELP HELP

[CoFree]

man you have to try every thing
sata card
sata cable
pci slot
even a different computer

try everything it has to flash D1
then it will be seeing it.

[daywalker082080]

ok ill keep trying. thanks for any other advice would help thanks alot

[CoFree]

let me know how it goes

[rkx]

I had a similar problem just last night it would hang after sending mtk or w/e and just change from d1 to d0 to x50 or something and wouldnt detect the drive no matter how many times i turned the system on and off.

It did that with the usb and cd methods just could not get it to work

this is what did it for me, turn on your xbox before sending the mtk thing, after pressing y and enter it showed x80, i turned it off and on and viola!! it started working !!

hope this helps and good luck it took me a good 3 hours to get it working

[daywalker082080]

I will try that soon as I get home tonight thanks for the friendly help............

[daywalker082080]

RGGGHH Still no luck im stumped... I want a darn flashed benq drive help guys...!!!

[CoFree]

do you have some other sata drive cd/dvd or hard drive.just to make sure the sata card is working
it has to be a via6421 a or L card

[daywalker082080]

I ordered the drive from new egg that you recommended..thats what im using

[daywalker082080]

WOW I DID IT!!!!!!!!!!!!!!!!!!!

[sadalius]

So what was holding you up on it?

[daywalker082080]

went in the sata pci card cd driver software and manually ran the installation instead of letting windows install its on drivers
now to the backup of the games lol...like a kid in a candy store......evil grin