ms28 Samsung

[2pac1987]

i need some help i moded my xbox360 with ixtreme and it worked fine but when i try to play a game it freezes after 10min of gameplay, i have tryed version 1.0,1.2,1.3 and 1.4 and they all freeze so i went and downloaded extreme firmware 5.3 and flashed my 360 and i'm still having the same problem so is there anything i can do to fix this? i also lost my original TS-H943 Xbox 360 firmware if i want to falsh it back to its original is there a place to get them, do i have any other options?

[lilrevuk]

I wouldn't have thought that was anything to do with firmware... If it was, then games wouldn't boot.

[CoFree]

man you will be better at this flashing thing than me after all that

anyway put the firmware back to ixtremem v1.4
its not the firmware if it boots.
check over the burn or the disc you are using
burn on good disc and burn slow
no faster than 2.4x speed

yeas you can find a orig firmware
you had better have your key if you lose that is all over
you will have a brick

[sadalius]

Try this as a test. Take your 360's case apart, then sit the dvd drive outside the case, leave the power cable and sata cable attached. Boot up your 360 and try playing the game while the drive is sitting outside the case. Take care not to kick any of the cables on the metal cage while it's outside the cage. But if it works like this, then you should know what the problem is. The drive is overheating inside the 360. You'll need to provide better cooling somehow.