Pointers on spoofing hit 47d

[xxTheKingxx]

Anyone have and pointers on spoofing hit 47d with benq?

[technoe]

Are you trying to put a BenQ in an old Hitachi system or vice versa?

[lilrevuk]

If you're putting the benq in...

Open jungleFlasher.... Load your Hit OFW as source, and the benq 1.51 as target, click spoof source to target. That's pretty much it...

Vice versa for putting the hit in...

Spoofing is really easy with Jungle Flasher, it can still be done with Firmware Toolbox, but JF is pretty much fully automated...

[xxTheKingxx]

Okay so Hit47 OFW as source and ixtreme 1.51 as target but what do I use to flash the FW onto the drive iprep or jungleflasher and when the spoofed cfw is created where do I put the file?

[xxTheKingxx]

Im trying to replace the hit 47d drive with a benq drive

[lilrevuk]

try the benq with JF, if you can't get anything go with Iprep...

-save the file to disk in JF, then add that to BACKUPS/1234567/12345 on your Iprep flash

-boot as usual, and use what ever serial you added the firmware to...

As always with spoofing, make sure you keep copies of BOTH OFW's. If the benq is out of another xbox, then this is especially important

[xxTheKingxx]

I still dont understand lol so its something like this
1) source target hitchai 47d OFW
2) Target benq ixtreme 1.51 Firm ware
3) spoof to target in jf
4) save the spoofed file as.....
5) Load up iprep and make flash disk bootable
6) Go to backups and place the spoofed file in their
after the 6th step I have no freakin idea what to do next lol so um if its not a bother can I get alittle more detail on how to do this because I keep getting error messages in dosflash for example ben 1234567 12345 already exisist or bencfw.bin doesnt exist....

[CoFree]

6) Go to backups and place the spoofed file in their

well you do this.

in the backup folder make 2 folders the 1st name 1234567 then in that folder put the 2nd folder name it 12345
then in the 2nd folder put a copy of your firmware or a copy of a cfw(hacked spoofed firmware)
this firmware must have a good key from your console.

rename the file "bencfw.bin"

then boot on the flash and run the fben 1234567 12345 command
and do what it tells you on the screen.
It will go like a normal flash from there on.
it will flash in that firmware.

[technoe]

If you can avoid using two different programs, I think you should. Jungle Flasher 1.55b will do it all for you if you have your pc set up correctly. That means loading the Benq firmware into the Firmware folder of Jungle Flasher and disabling your VIA drivers if you're using a VIA 6421A or L sata card. With jungle flasher you can unlock your Hitachi to retrieve the key, and then JF will ask you if you want to auto-load the firmware, click no. You then want to select your target as the BenQ iXtreme 1.51. Then jungle flasher will spoof the key into the Benq firmware. Now all you have to do is flash the benq with the spoofed firmware. You can save the spoofed firmware if you choose (recommended) so that you can reflash your benq if need be in the future.

[xxTheKingxx]

Yeh past couple days i've been spoofing and flashing acouple hit 47's with JF and Iprep it seems to work better for me. But I would like to point one thing out and that is I would like to thank you guys who've been dedicating their time to help new modders like me hack the xbox 360's. Less then 2 months i've learned how to hack almost every 360 drive out their due to the fact you guys have been very helpfull especially cofree. I would like to also say thanks abunch for the youtube tuts cofree! Man... They helped me out so much, but anyways kudos to what you guys are doing ...