Hei guys, Please answer quickly.
I did everything to flash my drive to the 1.51 ( it is a lite-on and i was reflashing it just as sadalius said in his video. but when i try to install portI032 it says error: install portI032 manullay.
I dont know what to do
Emergency
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: Emergency
PortIO32: Xbox 360 Device Driver
----------------------------------------------------
Install Driver Manually:
The driver/library installation procedure is very similar on all versions of Windows except Windows NT (see below).
The driver is installed using the "Add Hardware" option of the Control Panel. Since there is no hardware that will
be detected automatically by Windows, the PortIO32 driver will need to be installed by manually selecting a driver,
using the "Have Disk" button to point Windows to the "win\driver" directory. More detailed instructions are available
below:
Windows XP
----------
1. Open the Control Panel.
2. Open the "Add Hardware" wizard. If you are using Windows XP's default "Category View" for the Control Panel, this is done by clicking on "Printers and Other Hardware" and under "See Also" on the left, click "Add Hardware".
3. The wizard typically displays a screen explaining what it is used for. Click Next to continue.
4. The wizard may automatically scan for new hardware. The scanning will not detect anything related to PortIO32.
5. You may be asked "Have you already connected this hardware to your computer?" Regardless of whether you have installed any cards yet, click Yes.
6. You will be shown a list of the hardware already installed in your computer. Scroll all the way down and select "Add a new hardware device"
7. You will be asked whether Windows should search for the new hardware. Select "Install the hardware that I manually select from a list"
8. A list of hardware categories will be shown. Select "Show All Devices" (On some versions of Windows this may be called "Other")
9. Click the "Have Disk" button and point Windows to the "win\driver" directory of the PortIO32 distribution.
10. A list of drivers found in the directory you specified will be shown. Select the "PortIO32 Xbox 360 Device Driver" item and click Next.
11. Click Next again to "start installing your new hardware."
12. The files will be copied and installed. Click Finish to complete. You do not need to restart your computer.
----------------------------------------------------
Install Driver Manually:
The driver/library installation procedure is very similar on all versions of Windows except Windows NT (see below).
The driver is installed using the "Add Hardware" option of the Control Panel. Since there is no hardware that will
be detected automatically by Windows, the PortIO32 driver will need to be installed by manually selecting a driver,
using the "Have Disk" button to point Windows to the "win\driver" directory. More detailed instructions are available
below:
Windows XP
----------
1. Open the Control Panel.
2. Open the "Add Hardware" wizard. If you are using Windows XP's default "Category View" for the Control Panel, this is done by clicking on "Printers and Other Hardware" and under "See Also" on the left, click "Add Hardware".
3. The wizard typically displays a screen explaining what it is used for. Click Next to continue.
4. The wizard may automatically scan for new hardware. The scanning will not detect anything related to PortIO32.
5. You may be asked "Have you already connected this hardware to your computer?" Regardless of whether you have installed any cards yet, click Yes.
6. You will be shown a list of the hardware already installed in your computer. Scroll all the way down and select "Add a new hardware device"
7. You will be asked whether Windows should search for the new hardware. Select "Install the hardware that I manually select from a list"
8. A list of hardware categories will be shown. Select "Show All Devices" (On some versions of Windows this may be called "Other")
9. Click the "Have Disk" button and point Windows to the "win\driver" directory of the PortIO32 distribution.
10. A list of drivers found in the directory you specified will be shown. Select the "PortIO32 Xbox 360 Device Driver" item and click Next.
11. Click Next again to "start installing your new hardware."
12. The files will be copied and installed. Click Finish to complete. You do not need to restart your computer.
Re: Emergency
it's also in the read me
Re: Emergency
Thats something that I always do. Even with the amount of experience that I have, I always read the readme's 
Sadalius
No questions by PM please
No questions by PM please