
RHPG's Iprep v9
RHPG's Iprep v9
does the new RHPG's Iprep v9have full support over the 1.51 ixtreme firmware 

Re: RHPG's Iprep v9
worked fine for me when i updated a lite-on.
it dont dump from the sata though
you still have to get the dump from the rs232 cable
it dont dump from the sata though
you still have to get the dump from the rs232 cable
Re: RHPG's Iprep v9
cool as long as we have the tools and knowledge we can still make this happen one question cofree have you flashed a hitachi v79 with the new 1.51 firmware 

Re: RHPG's Iprep v9
cofree do when reflashing a sammy benny or liteon with newer firmware do i follow the same steps.
-wishka
-wishka
Re: RHPG's Iprep v9
iPrep does a good job of walking you through the steps for each drive but if you get confused you should check out our tutorials section.
Tutorials.
Tutorials.

Today Money, Tomorrow the WORLD!!
Re: RHPG's Iprep v9
i really meant to ask when reflashing a sammy benny or lite w/ iprep would i follow the same exact steps as in cofrees video tutorials? thanks a lot cofree
Re: RHPG's Iprep v9
yea man
you do
if you are reflashing a samor benq
you do it just like it has never been flashed.
as long as you have a backup of the firmware with a good key you can do it just like the video and not reboot
you can go right to the reflash.
with the lite-on you do it the same also
but
there is a small point here
if you soldered the r707 point it will not work
you have to use a probe on a lite-on reflash
other than that
its the same as if it was never flash.
you do
if you are reflashing a samor benq
you do it just like it has never been flashed.
as long as you have a backup of the firmware with a good key you can do it just like the video and not reboot
you can go right to the reflash.
with the lite-on you do it the same also
but
there is a small point here
if you soldered the r707 point it will not work
you have to use a probe on a lite-on reflash
other than that
its the same as if it was never flash.
Re: RHPG's Iprep v9
cofree i have a problem im using the probe but my lite-on wont dump im using iprep v9 

Re: RHPG's Iprep v9
Is it a new lite-on? If so you must dump through the serial cable using the CK3.

Today Money, Tomorrow the WORLD!!
Re: RHPG's Iprep v9
first manconan281 wrote:cofree i have a problem im using the probe but my lite-on wont dump im using iprep v9
you are hijacking someone elses thread
its not a big deal but its kind of rude.

yea
technoe is right
but we could use a litte more onfo man
go into the steps you are taking
you can just start your own thread and go into detail about what you are doing.
Re: RHPG's Iprep v9
thanks for the heads up cofree
Re: RHPG's Iprep v9
hey cofree1234 or anyone ...pleasee help im noob...what do i do before i flashing my lite-on drive....i was look cofree1234 new v9 lite-on video and i follow his vid ...and it said ERROR DUMMY KEY. pleaseee help
Re: RHPG's Iprep v9
hey COFREE1234 or ANYONE...pleaseee help im noob ..can u post a pic of rs232 cable on...cuz i cant find a serial port cable anywhere i the store and i google it. it show me that 9pin serial port and that 25 pink hole port..(http://www.sfcable.com/cable/c/db9.html ... DQodRQH7XQ" onclick="window.open(this.href);return false;)....that the link to get rs232 cable but which one do i need? and how do i plug in from my ck3?
- dalecheesy
- Ally of Robinhood
- Posts: 1379
- Joined: Sat Jan 24, 2009 8:08 pm
- Location: Sunderland UK
Re: RHPG's Iprep v9
http://www.sfcable.com/cable/p/D920-03.html" onclick="window.open(this.href);return false; Thats the one you need and it plugs into a comport on the back of your pc (if it has one) looks like this:
if you plan on using iprep and the r232 socket on the ck3. Just a heads up but in future make a new thread as its considered rude to hijack someones.

if you plan on using iprep and the r232 socket on the ck3. Just a heads up but in future make a new thread as its considered rude to hijack someones.
