Lite on drive Help

[int03h]

Have a question i have a lite on drive that i want to read/flash i have the ck3 but no probe if i solder R707 & R708 jumpers will i still need the probe or by doing that will it let me read the drive any help would be great thanks again.......Int03h

[technoe]

All you need to do is short the pads at R707, whether you do that with solder or just a flat head screwdriver is up to you. I have an old hook style multimeter lead that I bent out, that Fits between the pads perfectly.

[int03h]

k ill try the flat head way so i just do R707 pads only. witch how to is the best one to fallow.

[int03h]

Not sure what iam doing wrong did step by step as cofree video not sure if the comport is right one is there a way to check and see what one i need to pick in the iprep window it has 4 of them i picked 3 and when i do the dlit******* **** it keeps error out no connection anyone ever have this problem and can lead me in the right direction.......Int03h

[CoFree]

you need to have the cam cable on the com 1 port
that is a rs232 9pin com cable you are using right.
and the sata cable is hooked up

[commando_lee]

All you need to do is short the pads at R707, whether you do that with solder or just a flat head screwdriver is up to you. I have an old hook style multimeter lead that I bent out, that Fits between the pads perfectly.

is there a tutorial about either soldering or shorting the ports on lite-on drive?

[int03h]

any other ideas guys still cant read this darn drive.

[CoFree]

well man
we need a little more than that
what have you tried
did you solder thr 707 point
if not try that
or pick up a probe

[dalecheesy]

As above, but if you don't feel confident soldering or bridging, diy probes are a doddle to make: viewtopic.php?f=101&t=3967" onclick="window.open(this.href);return false;

[int03h]

This drive is kicking my a** i still cant get jungle to reconise the drive for me to read it i built the homemade probe as dalecheesy posted but still cant get crap not sure if my pc is setup right i just cant get it to do anything i can flash any other drive but the liteon some plz shoot me lol thanks guys for any help.

[dalecheesy]

Go into your bios and make sure that your com ports are set to auto, should be as they're discoverable in jungleflasher but its worth a check.

Check that it doesn't look like this



Also have you got the drive tray half shut with the probe attached before pressing enter after the Dlit 1234567 12345 command?

[int03h]

Just checked all them and there good also i made sure i inserted the probe and tray half open not sure what is going on i might have to dump this drive and start from scratch or something lol..........Int03h

[int03h]

Just wanted to say thanks for all the info everyone gave and thank you to dalecheesy for the info on the probe it worked like a charm once i hgot the new HD booted up not sure what is wrong with my orig drive this is what i had to do to get it to read the liteon. Took a 20gig HD and loaded xp on it and just put all my 360 progys on it and loaded up jungle and damn i got it find the liteon drive follow cofree video on how to flash the liteon and the gave the probe a try and it worked damn almost a week and there it was so now if i want to flash a drive i just boot up on the backup HD easy just wanted to thank you guys for all the good info here luv this place.........Int03h