Bad Falsh?

[allotesting]

Hi

I flashed my liteon from FW 1.5 to 1.51 and now I can boot the Wave 3 games but after a while an error says that the disk is unreadable.
Can it be a bad flash?
I must mention that the wave 3 games that I tried are copies from a Kreon drive ( Metallica )and downloaded also ( Metallica & Sacred 2 )

[sadalius]

We don't talk about downloaded games here. It's one of the rules. Simply put, if the console boots a backup, it's not the flash. You did good on that part if it boots a backup at all. The thing to look at next would be the media.

[allotesting]

Thanks for the fast reply

all my old games work flawlessly. I have only problems with the wave3.
what can I do about that.
I saw that many people have problems with the FW 1.6 with the liteon drive. Do you suggest that I should wait or will it be a good step if i flash my liteon drive with the FW 1.6
Thanks

[strykr535]

Like sadalius said usually when you get that error you might wanna start looking at your media..what kind of discs are u using?? how fast are you burning the iso to the discs??

[allotesting]

Verbatim +R DL 2.4x and 2x

might be my burner also even if there is no error messages when burning using imgBurn 2.4.2.0
I will try to burn an iso with another burner if I can borrow one from a friend

[HAZ3]

Verbatim +R DL 2.4x and 2x

might be my burner also even if there is no error messages when burning using imgBurn 2.4.2.0
I will try to burn an iso with another burner if I can borrow one from a friend

stick w/2x & verify the written data, that's what i do however problem may just be in the drive itself or bad batch of media despite the fact you are using the correct media. who knows until you try.

[CoFree]

& verify the written data,

that is not needed
it will just make it take longer

[sadalius]

If your old games boot fine and your only having trouble with 3rd wave games, are you 100% sure you flash it with 1.51?

[allotesting]

Hi

JUst checked the jf.log and giving:

Auto-Loading target file D:\traiter\Game tools\XBOX360\1.51\JungleFlasher.0.1.51.Beta\JungleFlasher v0.1.51 Beta\firmware\ix151-liteon.bin

So the drive has been flashed with IX1.51-liteon.bin

So I wonder what would be the problem

[CoFree]

wow
got me man

unless your wave 3 games are not good for some reason

[allotesting]

Don't you think that It can be a bad burn (Burner problem).
Didn't have time to check with another burner.
So If I understood well, this problem can't be a IXtrem flash problem?

[CoFree]

well, this problem can't be a IXtrem flash problem?

not as long as you know for a fact
you flash in v1.51 or v1.6

Don't you think that It can be a bad burn (Burner problem).

well the other backups are working
so no i would say not
the burner will not know the difference in a wave 2 or wave 3 iso

[allotesting]

Yes the other backups are working but were burned a while ago, so something might turned wrong meanwhile.
So what do you think about this

[CoFree]

man you can try a different burner
maybe a different pc

[allotesting]

Tried the same exact isos with another burner (LG) and everything is OK.
So apparently it was a problem with my burner (It is a Sony)
Thanks everybody