help with e74 w/ 1022 code

[ace135]

got e74 found the code 1022 any fixes for this xclamp or heatgun it should b somthin with a/v correct from what i read about the 1022 code

[CoFree]

E74: There is high chance it's a scaler chip problem (the "ANA" or "HANA" chip near the AV cable connection) it can also be caused by a faulty AV cable so check that first. In some cases it is a problem with the GPU and may be repairable by doing the x-clamp replacement (see error 0102)

you can try a xclamp fix

[ace135]

ok so xclamp and other than that its heatgun then another 360

[CoFree]

have a read over this post
viewtopic.php?f=101&t=5051&p=29156&hilit=e74#p29156" onclick="window.open(this.href);return false;

[ace135]

i did read that post the console i refer to is out of warranty so it is what it is ill try xclampin and so on quick q/a does jungle or dos get keys w/o probes yet cause im gonna get another one regaurdless so ill have 3 well 2 if this 1 goes bye bye i do have probe just askin

[CoFree]

well
you can solder the r707
point
and
you will not need a probe

[215XboxMods]

E74 is tricky, sometimes they won't come back even after a reflow with a BGA sometimes. If you got a warrenty sticker, I would send it to Microsoft as they will most likely replace the motherboard or give you a different console. If you don't have a warranty sticker try to get one from a friend take it off with a blow dryer and razor blade, take your time get it really hot! If you got a silver sticker take extra care when removing, the pink/purple sticker is a lot easier to remove. When you send in the Xbox and get it back, take the brand new sticker they give you and give it back to the friend.(If you need to pay the ups guy they did not fix it) Ive done this tons of times and never had any problems I even sent in a modded console to see what happens and got them back fixed too. (I recommend putting your Original Firmware First, you never know what changes with the future) If for some reason you have no warranty ex: It Expired or you cut the original case ect.. the best thing is a Reflow or even better a Reball. (Reball is better you completely remove the defective lead free solder microsoft uses and replace it with new Lead Solder) This is costly around $30-$100 but might fix your problem most places do NO FIX NO CHARGE or at the most $10 if the reflow don't work.

If you don't want to pay someone try this! Beware the heatgun is a last resort after x clamp fix ect.. and the next place is trash. I have a BGA and used the heat gun before I had it and its hit or miss (be careful don't burn nothing plastic use Aluminum Foil to protect everything) Heres a Video http://www.youtube.com/watch?v=j-Eyz0sOKR4" onclick="window.open(this.href);return false;
Primary Errorcode 1 RLOD E-Code / Secondary Errorcode E74 / 1022
Known fixes:
1)If you soldered anything to the mainboard before it occured, whatever you are powering from this point is drawing too much power so get rid of it.Also get rid of everything that you can see that might bridge anything near the GPU.
2) X-Clamp replacement
3) Reflowing the solder with a BGA or heatgun(Concentrate on the GPU and (H)ANA chip
Description:
This error is caused by a cold solder joint under the GPU, (H)ANA-chip or in between (the solder cracks).Can also be a component that is missing or damaged so look for missing parts near the GPU and the (H)ANA chip.

[ace135]

ok so xclampin did nothin 4 me got same error so redid it put it together messed with the ana chip which is under the shroud behind the gpu sink i think used a penny to apply even pressure on chip so i put some pressure on it hit power it turned on left it on for 4-5 hours that chip was roastin turned it off let it cool for an hour or so checked it workin fine for now so maybe it flow itself from being on this wouldnt suprise me as my boy said he was playin for hours of course he change games and pushed the xbox back under the tv well he moved it while running and extremely hot and boom red light as everybody knows u dont move this system when running a lesson he has learned im now goin to mod the case to keep it cooler also this system has three heat sinks in it is this something xbox is tryin to do to elimanate the overheating prob cause if it is it didnt work i did no soldering its out of war and i will never deal with microsoft again they have never fixed a xbox that i have sent them yea it works for a while but always fails ms sucks like cofree says if not for the certain games on xbox they be done for thanks robin hoods as always the best help around

[215XboxMods]

I do a reflow service in Philadelphia and I would say 95% of my RROD repairs are older systems. I found that pre-BenQ drive was an easy way to tell not a MS repair w/a BenQ a brand new console. I been there and went through 4 brand new consoles in 2006/2007. You need a jasper look on the box for 12.1v If I remember correctly. They got aluminum heat syncs in the new ones I got 1 BenQ/Jasper 2 LiteOn/Jasper and they work great they read backups a 1000% better than Samsung/Hitachi. I Had them for a good amount of time and no problem for over a year and a half of leaving it on all day. I think the new ones are fixed in my opinion it only took 20 some million Consoles to get there though.

Microsoft is supposed to make another hardware upgrade to combine GPU/CPU they say its unbreakable. I also see PS3 failure too not on MS scale but YellowLightofDeath and 3 beeps of death happen to.

[CoFree]

Reseal and Return. Now thats how you screw MS & WALMART lol. Don't even say you opened it and get a gift recipt

careful there
there is only one that i will let go to the darkside on the site.

[215XboxMods]

Sorry Its gone now hope it helped someone.