Samsung can not flash jungleflasher1.62 drive

[sega]

Samsung can not flash jungleflasher1.62 drive, I have firmware 1.5, and now want to upgrade 1.6, before I find the drive firmware has been erased, but the time when I showed can not write, can not read can not Erase the!

[commando_lee]

i had that problem with the sammy i just done, lucky enuff i had backed the key up and just used iprep to write the drive. do you have the key??

[boris45]

Just done a sammy with jungleflasher 1.62 no probs, all went without a hitch.

[technoe]

Boris - There's no reason to brag to someone who's having problems!!

sega - The biggest thing here is that you have a good dump of the drive. If you were able to do that, then you'll be able to flash that drive with both iPrep and JF. With JF the biggest thing here is to make sure that the intro/device id is giving you good info. If not then it's probably an issue with the drive than can be fixed by power cycling the drive and trying different tray configurations. Yes, I know you don't have to mess with the tray to flash a stock sammy but since it is erased it might be necessary to mess around with that.
If after a failed attempt with JF, just build your custom firmware with JF, that has your good key from that drive. rename it to samcfw.bin and load it into your iPrep thumbstick. Once your booted into iPrep type DosFlash, select your drive's port number, then you should get a prompt about what you want to do next, press "w" for write, then it'll ask you what file you would like to write, type samcfw.bin, and hit enter. It should start writing the firmware into your drive. Once it's done test it out and let us know how it went.

[boris45]

No man you seem to have missunderstood, i wasnt bragging, im new to this also, just letting the guy know that it can be done.
I would have posted more details but as i said im also new to this and some times not confident enough to post full details just incase i miss something, all i did was to use the new version of jungle and followed the guide
Apologise if anyone thought that i was being condescending it wasnt intended.

[commando_lee]

Boris - There's no reason to brag to someone who's having problems!!

sega - The biggest thing here is that you have a good dump of the drive. If you were able to do that, then you'll be able to flash that drive with both iPrep and JF. With JF the biggest thing here is to make sure that the intro/device id is giving you good info. If not then it's probably an issue with the drive than can be fixed by power cycling the drive and trying different tray configurations. Yes, I know you don't have to mess with the tray to flash a stock sammy but since it is erased it might be necessary to mess around with that.
If after a failed attempt with JF, just build your custom firmware with JF, that has your good key from that drive. rename it to samcfw.bin and load it into your iPrep thumbstick. Once your booted into iPrep type DosFlash, select your drive's port number, then you should get a prompt about what you want to do next, press "w" for write, then it'll ask you what file you would like to write, type samcfw.bin, and hit enter. It should start writing the firmware into your drive. Once it's done test it out and let us know how it went.

Thats how i had to do the drive, it was stuck in vendor mode,

[sega]

I use iprep write W drive select do unknow chip models, but also can not brush to write!

[CoFree]

man
resize the img with paint
its in all windows pc