***WARNING***Serial Data is bad jungle flasher Liteon drive

[paddypitbug]

o.k so here's my problem - hooked up ck3 pro kit to Liteon with sata cable to my via 6421 card - power on to the kit then hit eject - powerd off ck3 pro half closed manualy the Liteon drive tray .... powerd on ck3 pro kit then opened up jungle flasher .... hit the MTK Flash 32 ... drive seen in Drive properties .... in lower screen it shows this and the same in the DVDKey 32 screen also , and Via Ports only box and include non IDE Ports Both Un-ticked ... JungleFlasher 0.1.55 Beta
Session Started Thu Jun 04 12:04:16 2009


This is a 32 bit process running on 2 x 32 bit CPUs
Found 8 I/O Ports.
Found 1 Com Ports.
Found 2 windows drives.
Found 1 CD/DVD drives.

So I insert ck3 pro spear/probe into the R707 hole and probe light is Good so I then hit ( Get Key , Create Dummy Bin , Open As Sourse ) and then this Happens ( A box with DVDKEY 32 on it appears and states this ***WARNING***Serial Data is bad


I have tried every thing I can think of and even in all versions of iprep I can not key the keys read off this Damm Liteon on either of my two pc's - can anyone please advise . I have said it befor and will say it again just to let off steam lol the sooner the end comes to the 360 not having Liteon Drives in em the better.

[rkd2398]

Do you have a RS232 cable that you can hook to the pc and the CK3? The problem is that there is no way for the probe/CK3 to transfer the information to the computer.

[technoe]

Also most if note all software will list at least one COM port whether your mobo has one or not. So if you're using the usb method then you should have two com ports in Jungle Flasher. With me JF showed COM1 and COM3. Make sure you select the right one.

[paddypitbug]

hello folks first of all thank you for your prompt replys

I have tried both the usb cable linked to the ck3 pro kit and the rs232 cable - also I can only see the COM port 1

to be honest I tried every thing including the disable via card , I even wiped out the entire OS off the old pc an re-installed xp just to make sure there was no missing file Dll's from that - I did notice that when I tried to install the ck3tool_v1.2.4 \ drivers it would not install and the install shield error has kept appearing to be honest I have never had this befor and I am honestly at a loss

[technoe]

You don't need the Ck3 drivers, Windows should try to automatically install a COM driver for the ck3 when it's powered on and connected.

[paddypitbug]

thank you again for your replys - I have tried the rs232 cable - no joy - I tried the usb cable that came with the ck3 pro kit ... no joy so I have bought a new ck3 pro kit and I will test on my 360 to see if I still get the same situation if I do could you please advise on what software besides jungle flasher & iprep should be installed on my pc because I have got puzzeld with this happening when for some strange reason it has not ever happend befor as every thing went as smooth as clock work I could not even get the keys to be read using iprep - just wondering what I am left to do - once again thank you for all your help